Skip to content

arm64: dts: ti: k3-am62p/j722s: Add gpio-ranges properties

Nishanth Menon linux-arm-kernel linux-devicetree lkml 2 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 1 replyApplied
  2. v13 patches 3 repliesSuperseded

Changes in v2 from the cover letter

- Mux definition PIN_GPIO_RANGE_IOPAD instead of PIN_GPIO_MUX_MODE
- Refactored on top of next-20240626
- Note: since the patches have changed, I have skipped Dhruva's reviewed-by

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Modearch/arm64/boot/dts/ti/k3-pinctrl.h+3 -00 replies
2/3arm64: dts: ti: k3-am62p: Add gpio-ranges propertiesarch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi arch/arm64/boot/dts/ti/k3-am62p-main.dtsi+25 -00 replies
3/3arm64: dts: ti: k3-j722s: Add gpio-ranges propertiesarch/arm64/boot/dts/ti/k3-j722s-main.dtsi+18 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH V2 0/3] arm64: dts: ti: k3-am62p/j722s: Add gpio-ranges properties

Hi,

This series was tested on BeagleY-AI[1] using the script[2].

This allows gpiod to request for a gpio that is not in the default GPIO mux mode and the framework controls the mux over to required GPIO mode.

The series is based off next-20240617.

NOTE: there is also a dtb_warning that is added, The fix for which is in the binding[3].

Changes since V1:
- Mux definition PIN_GPIO_RANGE_IOPAD instead of PIN_GPIO_MUX_MODE
- Refactored on top of next-20240626
- Note: since the patches have changed, I have skipped Dhruva's reviewed-by

V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/

Jared McArthur (1):
arm64: dts: ti: k3-j722s: Add gpio-ranges properties

Nishanth Menon (2):
arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
arm64: dts: ti: k3-am62p: Add gpio-ranges properties

 .../boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi |  8 ++++++++
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi      | 17 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi      | 18 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-pinctrl.h            |  3 +++
 4 files changed, 46 insertions(+)

base-commit: df9574a57d02b265322e77fb8628d4d33641dda9

[1] https://www.beagleboard.org/boards/beagley-ai
[2] https://gist.github.com/nmenon/4973770cf0df3f02c2e4f7f3d048d80d
[3] https://lore.kernel.org/linux-arm-kernel/[email protected]/

Signature · 1 line
2.43.0