Skip to content

net: support 2.5G ethernet in dwmac-qcom-ethqos

Bartosz Golaszewski linux-arm-kernel linux-arm-msm lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 17 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8net: phy: add support for overclocked SGMIIdrivers/net/phy/phy-core.c drivers/net/phy/phylink.c include/linux/phy.h+17 -16 replies
2/8net: stmmac: qcom-ethqos: add support for 2.5G overlocked SGMII modedrivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c+11 -00 replies
3/8net: phy: aquantia: add missing include guardsdrivers/net/phy/aquantia/aquantia.h+5 -01 reply
4/8net: phy: aquantia: add support for aqr115cdrivers/net/phy/aquantia/aquantia_main.c+39 -22 replies
5/8net: phy: aquantia: wait for FW reset before checking the vendor IDdrivers/net/phy/aquantia/aquantia.h drivers/net/phy/aquantia/aquantia_firmware.c drivers/net/phy/aquantia/aquantia_main.c+8 -32 replies
6/8net: stmmac: provide the link_up() callbackdrivers/net/ethernet/stmicro/stmmac/stmmac_main.c include/linux/stmmac.h+4 -00 replies
7/8net: stmmac: provide the open() callbackdrivers/net/ethernet/stmicro/stmmac/stmmac_main.c include/linux/stmmac.h+4 -00 replies
8/8net: stmmac: qcom-ethqos: add a DMA-reset quirk for sa8775p-ride-r3drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c+33 -06 replies

Reviews trailers per patch

1 of 8 patches has a Reviewed-by or Acked-by.

PatchAndrew Lunn
1/8
2/8
3/8R-b
4/8
5/8
6/8
7/8
8/8

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH net-next 0/8] net: support 2.5G ethernet in dwmac-qcom-ethqos

From: Bartosz Golaszewski <[email protected]>

The following series introduces various related changes that allow supporting 2.5G ethernet on the sa8775p-ride board.

First two patches add support for the new SGMII mode in PHY core and the dwmac-qcom-ethqos driver. Next three introduce support for a new PHY model to the aquantia driver (while at it: fix two issues I noticed).

Final three provide a way to work around a DMA reset issue on the sa8775p-ride board where RX clocks from the PHY are not available during the reset.

Bartosz Golaszewski (8):
net: phy: add support for overclocked SGMII
net: stmmac: qcom-ethqos: add support for 2.5G overlocked SGMII mode
net: phy: aquantia: add missing include guards
net: phy: aquantia: add support for aqr115c
net: phy: aquantia: wait for FW reset before checking the vendor ID
net: stmmac: provide the link_up() callback
net: stmmac: provide the open() callback
net: stmmac: qcom-ethqos: add a DMA-reset quirk for sa8775p-ride-r3

 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 44 +++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  6 +++
 drivers/net/phy/aquantia/aquantia.h           |  6 +++
 drivers/net/phy/aquantia/aquantia_firmware.c  |  4 ++
 drivers/net/phy/aquantia/aquantia_main.c      | 47 +++++++++++++++++--
 drivers/net/phy/phy-core.c                    |  1 +
 drivers/net/phy/phylink.c                     | 13 ++++-
 include/linux/phy.h                           |  4 ++
 include/linux/stmmac.h                        |  2 +
 9 files changed, 121 insertions(+), 6 deletions(-)
Signature · 1 line
2.43.0