Fix mst daisy chain light up issue after resume
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 7 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | drm/dp_mst: Fix all mstb marked as not probed after suspend/resumedrivers/ | +2 | 1 reply | |
| 2/3 | drm/dp_mst: Skip CSN if topology probing is not done yetdrivers/ | +11 | 5 replies | |
| 3/3 | drm/amd/display: Solve mst monitors blank out problem after resumedrivers/ | +2 | 1 reply |
Reviews trailers per patch
All 3 patches have a Reviewed-by or Acked-by.
| Patch | Lyude Paul | Fangzhi Zuo |
|---|---|---|
| 1/3 | R-b | |
| 2/3 | R-b | |
| 3/3 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3] Fix mst daisy chain light up issue after resume
Under DP mst daisy chain configuration, unplug one chained monitor during suspend and then resume, observe left connected monitor not light up. After analyzing, seems it's due to changing dpcd DP_MSTM_CTRL value after LT during reume.
We used to defer handling UP request by disabling DP_UP_REQ_EN at the begining of resume process to avoid some problems. However, it turns out that it will cause problem on the hub if we change DP_UP_REQ_EN after LT. This series is trying to solve the problem by another way that we don't explicitly disable DP_UP_REQ_EN at source side. Instead, source should ignore the CSN event before source completeting topology probing during resume.
Wayne Lin (3):
drm/dp_mst: Fix all mstb marked as not probed after suspend/resume drm/dp_mst: Skip CSN if topology probing is not done yet drm/amd/display: Solve mst monitors blank out problem after resume
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++- drivers/gpu/drm/display/drm_dp_mst_topology.c | 15 +++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-)
Signature · 1 line
2.37.3