Skip to content

PCI: brcnstb: Enable STB 7712 SOC

Jim Quinlan linux-arm-kernel linux-devicetree linux-pci lkml 6 versions – Applied

Status from this message: Applied to controller/brcmstb, thank you!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest13 patches 46 repliesApplied
  2. v512 patches 39 repliesSuperseded
  3. v412 patches 34 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v312 patches20 repliesSuperseded
v212 patches29 repliesSuperseded
v18 patches15 repliesSuperseded

Changes in v6 from the cover letter

o Commit "Refactor for chips with many regular inbound windows" -- Use u8 for anything storing/counting # inbound windows (Stan) -- s/set_bar/add_inbound_win/g (Manivannan)
-- Drop use of "inline" (Manivannan)
-- Change cpu_beg to cpu_start, same with pcie_beg. (Manivannan) -- Used writel_relaxed() (Manivannan)
o Use swinit reset if available
-- Proper use of dev_err_probe() (Stan)
o Commit "Use common error handling code in brcm_pcie_probe()" -- Rewrite commit msg in paragraph form (Manivannan)
-- Refactor error path at end of probe func (Manivannan) -- Proper use of dev_err_probe() (Stan)
o New commit "dt-bindings: PCI: Change brcmstb maintainer and cleanup" -- Break out maintainer change and small cleanup into a separate commit (Krzysztof)

Patches in v6 Applied

#Subject and filesSizeRepliesApplied
1/13dt-bindings: PCI: Change brcmstb maintainer and cleanupDocumentation/devicetree/bindings/pci/brcm,stb-pcie.yaml+3 -32 replies
2/13dt-bindings: PCI: Use maxItems for reset controllersDocumentation/devicetree/bindings/pci/brcm,stb-pcie.yaml+8 -42 replies
3/13dt-bindings: PCI: brcmstb: Add 7712 SoC descriptionDocumentation/devicetree/bindings/pci/brcm,stb-pcie.yaml+26 -20 replies
4/13PCI: brcmstb: Use common error handling code in brcm_pcie_probe()drivers/pci/controller/pcie-brcmstb.c+12 -132 replies
5/13PCI: brcmstb: Use bridge reset if availabledrivers/pci/controller/pcie-brcmstb.c+19 -525 replies
6/13PCI: brcmstb: Use swinit reset if availabledrivers/pci/controller/pcie-brcmstb.c+24 -02 replies
7/13PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specificdrivers/pci/controller/pcie-brcmstb.c+24 -152 replies
8/13PCI: brcmstb: Remove two unused constants from driverdrivers/pci/controller/pcie-brcmstb.c+0 -50 replies
9/13PCI: brcmstb: Don't conflate the reset rescal with phy ctrldrivers/pci/controller/pcie-brcmstb.c+14 -30 replies
10/13PCI: brcmstb: Refactor for chips with many regular inbound windowsdrivers/pci/controller/pcie-brcmstb.c+181 -544 replies
11/13PCI: brcmstb: Check return value of all reset_control_xxx callsdrivers/pci/controller/pcie-brcmstb.c+73 -291 reply
12/13PCI: brcmstb: Change field name from 'type' to 'soc_base'drivers/pci/controller/pcie-brcmstb.c+21 -212 replies
13/13PCI: brcmstb: Enable 7712 SOCsdrivers/pci/controller/pcie-brcmstb.c+20 -00 replies

Reviews trailers per patch

All 13 patches have a Reviewed-by or Acked-by.

PatchFlorian FainelliKrzysztof KozlowskiStanimir VarbanovManivannan Sadhasivam
1/13R-b R-b
2/13R-b R-b
3/13R-b R-b
4/13R-b R-b
5/13R-b R-b R-b
6/13R-b R-b
7/13R-b R-b R-b
8/13R-b R-b R-b
9/13R-b R-b R-b
10/13R-b R-b A-b
11/13R-b R-b R-b
12/13R-b R-b
13/13R-b R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v6 thread

Cover letter [PATCH v6 00/13] PCI: brcnstb: Enable STB 7712 SOC

V6 Changes
o Commit "Refactor for chips with many regular inbound windows" -- Use u8 for anything storing/counting # inbound windows (Stan) -- s/set_bar/add_inbound_win/g (Manivannan)
-- Drop use of "inline" (Manivannan)
-- Change cpu_beg to cpu_start, same with pcie_beg. (Manivannan) -- Used writel_relaxed() (Manivannan)
o Use swinit reset if available
-- Proper use of dev_err_probe() (Stan)
o Commit "Use common error handling code in brcm_pcie_probe()" -- Rewrite commit msg in paragraph form (Manivannan)
-- Refactor error path at end of probe func (Manivannan) -- Proper use of dev_err_probe() (Stan)
o New commit "dt-bindings: PCI: Change brcmstb maintainer and cleanup" -- Break out maintainer change and small cleanup into a separate commit (Krzysztof)

V5 Changes:
o All commits: Use imperative voice in commit subjects/messages (Manivannan)
o Commit "PCI: brcmstb: Enable 7712 SOCs"
-- Augment commit message to include PCIe details and revision.
(Manivannan)
o Commit "PCI: brcmstb: Change field name from 'type' to 'model'" -- Instead of "model" use "soc_base" (Manivannan)
o Commit "PCI: brcmstb: Refactor for chips with many regular inbound BARs" -- Get rid of the confusing "BAR" variable names and types and use something like "inbound_win". (Manivannan)
o Commit "PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE..." -- Mention in the commit message that this change is in preparation for the 7712 SoC. (Manivannan)
o Commit: "PCI: brcmstb: Use swinit reset if available"
-- Change reset name "swinit" to "swinit_reset" (Manivannan) -- Add 1us delay for reset (Manivannan)
-- Use dev_err_probe() (Multiple reviewers)
o Commit "PCI: brcmstb: Use bridge reset if available"
-- Change reset name "bridge" to "bridge_reset" (Manivannan) -- The Reset API can take NULL so need need to test variable
before calling (Manivannan)
-- Added a call to bridge_sw_init_set() method in probe()
as some registers cannot be accessed w/o this. (JQ)
o Commit "PCI: brcmstb: Use common error handling code in ..." -- Use more descriptive goto label (Manivannan)
-- Refactor error paths to be less encumbered (Manivannan) -- Use dev_err_probe() (Multiple reviewers)
o Commits "dt-bindings: PCI: brcmstb: ..."
-- Specify the "resets" and "reset-names" in the same manner
as does qcom,ufs.yaml specifies "clocks" and "clock-names" (Krzysztof)
-- Drop reset desccriptions as they were pretty content-free
anyhow. (Krzysztof)

V4 Changes:
o Commit "Check return value of all reset_control_xxx calls" -- Blank line before "return" (Stan)
o Commit "Use common error handling code in brcmstb_probe()" -- Drop the "Fixes" tag (Stan)
o Commit "dt-bindings: PCI ..."
-- Separate the main commit into two: cleanup and adding the
7712 SoC (Krzysztof)
-- Fold maintainer change commit into cleanup change (Krzysztof) -- Use minItems/maxItems where appropriate (Krzysztof) -- Consistent order of resets/reset-names in decl and usage
(Krzysztof)

V3 Changes:
o Commit "Enable 7712 SOCs"
-- Move "model" check from outside to inside func (Stan)
o Commit "Check return value of all reset_control_xxx calls" -- Propagate errors up the chain instead of ignoring them (Stan)
o Commit "Refactor for chips with many regular inbound BARs" -- Nine suggestions given, nine implemented (Stan)
o Commit "Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific" -- Drop tab, add parens around macro params in expression (Stan)
o Commit "Use swinit reset if available"
-- Treat swinit the same as other reset controllers (Stan)
Stan suggested to use dev_err_probe() for getting resources but I will defer that to future series (if that's okay).
o Commit "Get resource before we start asserting resets" -- Squash this with previous commit (Stan)
o Commit "Use "clk_out" error path label"
-- Move clk_prepare_enable() after getting resouurces (Stan) -- Change subject to "Use more common error handling code in
brcm_pcie_probe()" (Markus)
-- Use imperative commit description (Markus)
-- "Fixes:" tag added for missing error return. (Markus)
o Commit "dt-bindings: PCI ..."
-- Split off maintainer change in separate commit.
-- Tried to accomodate Krzysztof's requests, I'm not sure I
have succeeded. Krzysztof, please see [1] below.

[1] Wrt the YAML of brcmstb PCIe resets, here is what I am trying to describe:

CHIP NUM_RESETS NAMES
==== ========== =====
4908 1 perst
7216 1 rescal
7712 3 rescal, bridge, swinit
Others 0 -

V2 Changes (note: four new commits):
o Commit "dt-bindings: PCI ..."
-- s/Adds/Add/, fix spelling error (Bjorn)
-- Order compatible strings alphabetically (Krzysztof)
-- Give definitions first then rules (Krzysztof)
-- Add reason for change in maintainer (Krzysztof)
o Commit "Use swinit reset if available"
-- no need for "else" clause (Philipp)
-- fix improper use of dev_err_probe() (Philipp)
o Commit "Use "clk_out" error path label"
-- Improve commit message (Bjorn)
o Commit "PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific" -- Improve commit subject line (Bjorn)
o Commit (NEW) -- Change field name from 'type' to 'model'
-- Added as requested (Stanimir)
o Commit (NEW) -- Check return value of all reset_control_xxx calls -- Added as requested (Stanimir)
o Commit (NEW) "Get resource before we start asserting reset controllers" -- Added as requested (Stanimir)
o Commit (NEW) -- "Remove two unused constants from driver"

V1:
This submission is for the Broadcom STB 7712, sibling SOC of the RPi5 chip. Stanimir has already submitted a patch "Add PCIe support for bcm2712" for the RPi version of the SOC. It is hoped that Stanimir will allow us to submit this series first and subsequently rebase his patch(es).

The largest commit, "Refactor for chips with many regular inbound BARs" affects both the STB and RPi SOCs. It allows for multiple inbound ranges where previously only one was effectively used. This feature will also be present in future STB chips, as well as Broadcom's Cable Modem group.

Jim Quinlan (13):
dt-bindings: PCI: Change brcmstb maintainer and cleanup
dt-bindings: PCI: Use maxItems for reset controllers
dt-bindings: PCI: brcmstb: Add 7712 SoC description
PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
PCI: brcmstb: Use bridge reset if available
PCI: brcmstb: Use swinit reset if available
PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets
SoC-specific
PCI: brcmstb: Remove two unused constants from driver
PCI: brcmstb: Don't conflate the reset rescal with phy ctrl
PCI: brcmstb: Refactor for chips with many regular inbound windows
PCI: brcmstb: Check return value of all reset_control_xxx calls
PCI: brcmstb: Change field name from 'type' to 'soc_base'
PCI: brcmstb: Enable 7712 SOCs

 .../bindings/pci/brcm,stb-pcie.yaml           |  40 +-
 drivers/pci/controller/pcie-brcmstb.c         | 513 +++++++++++++-----
 2 files changed, 412 insertions(+), 141 deletions(-)

base-commit: e724918b3786252b985b0c2764c16a57d1937707

Signature · 1 line
2.17.1