Skip to content

Add NPCM8XX clock driver

Tomer Maimon openbmc 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 1 replyIn review
  2. v33 patches 4 repliesSuperseded
  3. v23 patches 2 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v16 patches8 repliesSuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: reset: npcm: add clock propertiesDocumentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml+18 -00 replies
2/3reset: npcm: register npcm8xx clock auxiliary bus devicedrivers/reset/Kconfig drivers/reset/reset-npcm.c include/soc/nuvoton/clock-npcm8xx.h+90 -10 replies
3/3clk: npcm8xx: add clock controllerdrivers/clk/Kconfig drivers/clk/Makefile drivers/clk/clk-npcm8xx.c+460 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchBenjamin FairRob Herring
1/3R-b
2/3T-b
3/3T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [linux dev-6.6 v4 0/3] Add NPCM8XX clock driver

This patchset adds clock support for the Nuvoton Arbel NPCM8XX Board Management controller (BMC) SoC family.

The NPCM8xx clock controller is created using the auxiliary device framework and set up in the npcm reset driver since the NPCM8xx clock is using the same register region.

This patchset based on NPCM8xx clock controller V27
https://patchwork.kernel.org/project/linux-clk/cover/[email protected]/

This patchset was tested on the Arbel NPCM8XX evaluation board.

Changes since version 3:
- Fixed exceed line length.

Changes since version 2:
- Remove trailing whitespaces

Changes since version 1:
- Align with NPCM8xx clock controller V27.
- Remove patches that are not in the clock patchset.

Tomer Maimon (3):
dt-bindings: reset: npcm: add clock properties
reset: npcm: register npcm8xx clock auxiliary bus device
clk: npcm8xx: add clock controller

 .../bindings/reset/nuvoton,npcm750-reset.yaml |  18 +
 drivers/clk/Kconfig                           |   8 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-npcm8xx.c                     | 451 ++++++++++++++++++
 drivers/reset/Kconfig                         |   1 +
 drivers/reset/reset-npcm.c                    |  74 ++-
 include/soc/nuvoton/clock-npcm8xx.h           |  16 +
 7 files changed, 568 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/clk-npcm8xx.c
 create mode 100644 include/soc/nuvoton/clock-npcm8xx.h
Signature · 1 line
2.34.1