Skip to content

Add support for AD4113

Dumitru Ceclan b4-sent linux-devicetree linux-iio lkml 3 versions – In review

Get series with b4
b4 am [email protected] change-id 20240725-ad4113-baa63ff99245

Versions newest first

  1. v3 Latest3 patches 3 repliesIn review
  2. v22 patches 10 repliesSuperseded
  3. v12 patches 2 repliesSuperseded

Changes in v3 from the cover letter

- lowercase chip ID
- add patch to correctly order chip IDs defines
- picked up RB and ACK tags
- Link to v2: https://lore.kernel.org/r/[email protected]

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: adc: ad7173: add support for ad4113Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml+3 -00 replies
2/3iio: adc: ad7173: order chipID by valuedrivers/iio/adc/ad7173.c+1 -10 replies
3/3iio: adc: ad7173: add support for ad4113drivers/iio/adc/ad7173.c+35 -10 replies

Reviews trailers per patch

2 of 3 patches have a Reviewed-by or Acked-by.

PatchConor DooleyNuno Sa
1/3A-b
2/3
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/3] Add support for AD4113

This patch series adds support for the AD4113 ADC within the existing AD7173 driver.

The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs.

The part is not released yet and the documentation is not public. Register map is identical to AD4114 besides the lower width data register and the GPIO register.

Particularities of this model:
- 16 bit data register
- no temperature sensor
- no current inputs
- input buffers
- internal reference
- external reference REF-/REF+
- no second external reference REF2-/REF2+
- no AVDD2 supply
- 2 GPIO pins with config bits starting at a higher position in register
- 8 VINx inputs with voltage divider
- 16 channel registers and 8 setup registers

---
Changes in v3:
- lowercase chip ID
- add patch to correctly order chip IDs defines
- picked up RB and ACK tags
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- correctly set realbits and storagebits to 16 in iio_chan_spec
- describe bindings restrictions in commit message due to lack of sufficient diff context
- describe model differences better in cover letter
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Dumitru Ceclan (3):
dt-bindings: adc: ad7173: add support for ad4113
iio: adc: ad7173: order chipID by value
iio: adc: ad7173: add support for ad4113

 .../devicetree/bindings/iio/adc/adi,ad7173.yaml    |  3 ++
 drivers/iio/adc/ad7173.c                           | 38 ++++++++++++++++++++--
 2 files changed, 39 insertions(+), 2 deletions(-)

---
base-commit: 1c61e13d7dc9003662bd7fd6064dfea67e64b014
change-id: 20240725-ad4113-baa63ff99245

Best regards,

Signature · 1 line
Dumitru Ceclan <[email protected]>