Skip to content

add "nxp,phy-output-refclk" to instead of "nxp,rmii-refclk-in"

Wei Fang linux-devicetree lkml netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 5 repliesIn review
  2. v13 patches 10 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: net: tja11xx: use phy-output-refclk to instead of rmii-refclk-inDocumentation/devicetree/bindings/net/nxp,tja11xx.yaml+3 -150 replies
2/3net: phy: tja11xx: replace "nxp,rmii-refclk-in" with "nxp,phy-output-refclk"drivers/net/phy/nxp-tja11xx.c+6 -75 replies
3/3net: phy: c45-tja11xx: add support for outputing RMII reference clockdrivers/net/phy/nxp-c45-tja11xx.c drivers/net/phy/nxp-c45-tja11xx.h+28 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 net-next 0/3] add "nxp,phy-output-refclk" to instead of "nxp,rmii-refclk-in"

The TJA11xx PHYs have the capability to provide 50MHz reference clock in RMII mode and output on REF_CLK pin. Therefore, add the new property "nxp,phy-output-refclk" to support this feature.

Wei Fang (3):
dt-bindings: net: tja11xx: use phy-output-refclk to instead of
rmii-refclk-in
net: phy: tja11xx: replace "nxp,rmii-refclk-in" with
"nxp,phy-output-refclk"
net: phy: c45-tja11xx: add support for outputing RMII reference clock

 .../devicetree/bindings/net/nxp,tja11xx.yaml  | 18 ++----------
 drivers/net/phy/nxp-c45-tja11xx.c             | 29 +++++++++++++++++--
 drivers/net/phy/nxp-c45-tja11xx.h             |  1 +
 drivers/net/phy/nxp-tja11xx.c                 | 13 ++++-----
 4 files changed, 37 insertions(+), 24 deletions(-)
Signature · 1 line
2.34.1