Skip to content

net: pse-pd: tps23881: Reset GPIO support

Kyle Swenson linux-devicetree netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 5 repliesIn review
  2. v12 patches 5 repliesSuperseded

Changes in v2 from the cover letter

- Changed the reset pulse duration to be between 5us and 10us, per the

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: pse: tps23881: add reset-gpiosDocumentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml+3 -02 replies
2/2net: pse-pd: tps23881: Support reset-gpiosdrivers/net/pse-pd/tps23881.c+21 -02 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchKrzysztof KozlowskiOleksij RempelKory Maincent
1/2R-b R-b R-b
2/2A-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v2 thread

Cover letter [PATCH net-next v2 0/2] net: pse-pd: tps23881: Reset GPIO support

On some boards, the TPS2388x's reset line (active low) is pulled low to keep the chip in reset until the SoC pulls the device out of reset. This series updates the device-tree binding for the tps23881 and then adds support for the reset gpio handling in the tps23881 driver.

v1 -> v2:
- Changed the reset pulse duration to be between 5us and 10us, per the

    TPS23880 datasheet

- Changed the delay after reset to be 50ms instead of 1-10ms in order to meet the minimum recommended time before SRAM programming.

v1: https://lore.kernel.org/netdev/[email protected]/

Kyle Swenson (2):
dt-bindings: pse: tps23881: add reset-gpios
net: pse-pd: tps23881: Support reset-gpios

 .../bindings/net/pse-pd/ti,tps23881.yaml      |  3 +++
 drivers/net/pse-pd/tps23881.c                 | 21 +++++++++++++++++++
 2 files changed, 24 insertions(+)
Signature · 1 line
2.43.0