Skip to content

phycore-am62/4: Add more boot sources

Daniel Schultz u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest13 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/13configs: phycore_am64x_a53_defconfig: Enable CONFIG_OF_BOARD_SETUPconfigs/phycore_am64x_a53_defconfig+1 -00 replies
2/13include: env: phytec: k3_mmc: Rename variablesinclude/env/phytec/k3_mmc.env+5 -50 replies
3/13include: env: phytec: Add raucinit to k3_mmc environmentinclude/env/phytec/k3_mmc.env+4 -20 replies
4/13include: net: phytec: Add K3 network boot logicinclude/env/phytec/k3_net.env+22 -00 replies
5/13include: env: phytec: Add K3 boot logic for OSPI/QSPI flashesinclude/env/phytec/k3_spi.env+18 -00 replies
6/13board: phytec: phycore_am62x: Add Network/SPI Bootboard/phytec/phycore_am62x/phycore_am62x.env+8 -00 replies
7/13board: phytec: phycore_am64x: Add Network/SPI Bootboard/phytec/phycore_am64x/phycore_am64x.env+8 -00 replies
8/13configs: phycore_am62x_a53_defconfig: Make BOOTCMD genericconfigs/phycore_am62x_a53_defconfig+1 -10 replies
9/13configs: phycore_am64x_a53_defconfig: Make BOOTCMD genericconfigs/phycore_am64x_a53_defconfig+1 -10 replies
10/13configs: phycore_am62x_a53_defconfig: Merge am62x_a53_usbdfu.configconfigs/phycore_am62x_a53_defconfig+1 -10 replies
11/13configs: Add phycore_am62x_r5_usbdfu_defconfigconfigs/phycore_am62x_r5_usbdfu_defconfig+2 -00 replies
12/13configs: phycore_am62x_a53_defconfig: Fix CONFIG_ENV_SIZEconfigs/phycore_am62x_a53_defconfig+1 -10 replies
13/13configs: phycore_am62x_*_defconfig: Set PHYTEC as Manufacturerconfigs/phycore_am62x_a53_defconfig configs/phycore_am62x_r5_usbdfu_defconfig+2 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/13] phycore-am62/4: Add more boot sources

This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot sources:

- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network

Moreover, it adds required changes to the environment to boot an A/B system with RAUC and includes some minor fixes.

Daniel Schultz (12):
include: env: phytec: k3_mmc: Rename variables
include: env: phytec: Add raucinit to k3_mmc environment
include: net: phytec: Add K3 network boot logic
include: env: phytec: Add K3 boot logic for OSPI/QSPI flashes
board: phytec: phycore_am62x: Add Network/SPI Boot
board: phytec: phycore_am64x: Add Network/SPI Boot
configs: phycore_am62x_a53_defconfig: Make BOOTCMD generic
configs: phycore_am64x_a53_defconfig: Make BOOTCMD generic
configs: phycore_am62x_a53_defconfig: Merge am62x_a53_usbdfu.config
configs: Add phycore_am62x_r5_usbdfu_defconfig
configs: phycore_am62x_a53_defconfig: Fix CONFIG_ENV_SIZE
configs: phycore_am62x_*_defconfig: Set PHYTEC as Manufacturer

Wadim Egorov (1):
configs: phycore_am64x_a53_defconfig: Enable CONFIG_OF_BOARD_SETUP

 board/phytec/phycore_am62x/phycore_am62x.env |  8 +++++++
 board/phytec/phycore_am64x/phycore_am64x.env |  8 +++++++
 configs/phycore_am62x_a53_defconfig          |  8 +++----
 configs/phycore_am62x_r5_usbdfu_defconfig    |  3 +++
 configs/phycore_am64x_a53_defconfig          |  3 ++-
 include/env/phytec/k3_mmc.env                | 16 +++++++-------
 include/env/phytec/k3_net.env                | 22 ++++++++++++++++++++
 include/env/phytec/k3_spi.env                | 18 ++++++++++++++++
 8 files changed, 74 insertions(+), 12 deletions(-)
 create mode 100644 configs/phycore_am62x_r5_usbdfu_defconfig
 create mode 100644 include/env/phytec/k3_net.env
 create mode 100644 include/env/phytec/k3_spi.env
Signature · 1 line
2.25.1