Skip to content

arm64: dts: qcom: Introduce Huawei Matebook E Go

Pengyu Luo linux-arm-msm linux-devicetree lkml 2 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 7 repliesApplied
  2. v13 patches 17 repliesSuperseded

Changes in v2 from the cover letter

- use Co-developed-by: tag (Konrad)
- follow this order (property-n property-names) (Konrad)
- add a label for tablet mode switch (Konrad)
- handle line breaks properly (Konrad)
- remove the wlan calibration variant (Konrad)
- drop the venus node, as upstream has not supported it now
- Link to v1: https://lore.kernel.org/linux-arm-msm/[email protected]

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp)Documentation/devicetree/bindings/arm/qcom.yaml+1 -00 replies
2/3firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)drivers/firmware/qcom/qcom_scm.c+1 -00 replies
3/3arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)arch/arm64/boot/dts/qcom/Makefile arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts+1319 -06 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/3A-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/3] arm64: dts: qcom: Introduce Huawei Matebook E Go

Add support for the SC8280XP-based Huawei Matebook E Go (sc8280xp)

---
Changes in v2:
- use Co-developed-by: tag (Konrad)
- follow this order (property-n property-names) (Konrad)
- add a label for tablet mode switch (Konrad)
- handle line breaks properly (Konrad)
- remove the wlan calibration variant (Konrad)
- drop the venus node, as upstream has not supported it now
- Link to v1: https://lore.kernel.org/linux-arm-msm/[email protected]

---
Pengyu Luo (3):
dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp)
firmware: qcom: scm: Allow QSEECOM on Huawei Matebook E Go (sc8280xp)
arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

 .../devicetree/bindings/arm/qcom.yaml         |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1318 +++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |    1 +
 4 files changed, 1321 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
Signature · 1 line
2.47.1