riscv: dts: starfive: Enable USB3.0 for Pine64 Star64
Status from this message: Applied to riscv-dt-for-next, thanks!
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | riscv: dts: starfive: jh7110: pciephy0 USB 3.0 configuration registersarch/ | +2 | 10 replies | |
| 2/2 | riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 portarch/ | +5 | 1 reply |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Emil Renner Berthing |
|---|---|
| 1/2 | R-b |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v1 0/2] riscv: dts: starfive: Enable USB3.0 for Pine64 Star64
Add PCIe configuration of USB3.0 registers for pciephy0 mode on all JH7110 targets:
VisionFive2 1.2a, not applicable (USB-C peripheral mode power input) VisionFive2 1.3b, not applicable (USB-C peripheral mode power input) Milk-V Mars, one USB-A port USB3.0 disable (USB2.0 + PCIe0 peripheral) Pine64 Star64, one USB-A port USB3.0 enable (USB3.0 + PCIe0 disable)
Star64 dts is needing changes and the others are as-is; no information about DeepComputing FML13v01 what is expected for that.
Not covered in this series is setting of the USB overcurrent register, which is board-specific and so assumed to have been done at the bootloader phase.
E Shattow (2):
riscv: dts: starfive: jh7110: pciephy0 USB 3.0 configuration registers
riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 port
arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 5 +++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 ++ 2 files changed, 7 insertions(+)
base-commit: 708d55db3edbe2ccf88d94b5f2e2b404bc0ba37c
Signature · 7 lines
2.45.2 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv