Skip to content

Remove the directmap

Alejandro Vallejo xen-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v5 Latest15 patches 4 repliesIn review

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/15x86: Create per-domain mapping for guest_root_ptxen/arch/x86/include/asm/config.h xen/arch/x86/include/asm/domain.h xen/arch/x86/mm.c +3 more+74 -60 replies
2/15x86/pv: Use copy_domain_page() to manage domheap pages during initrd relocationxen/arch/x86/pv/dom0_build.c+8 -10 replies
3/15x86/pv: Rewrite how building PV dom0 handles domheap mappingsxen/arch/x86/pv/dom0_build.c+42 -190 replies
4/15x86: Initialize mapcache for PV, HVM, and idle domainsxen/arch/x86/domain.c xen/arch/x86/domain_page.c xen/arch/x86/include/asm/domain.h+26 -210 replies
5/15x86: Add a boot option to enable and disable the direct mapdocs/misc/xen-command-line.pandoc xen/arch/x86/Kconfig xen/arch/x86/include/asm/mm.h +3 more+57 -00 replies
6/15xen/x86: Add support for the PMAPxen/arch/x86/include/asm/fixmap.h xen/arch/x86/include/asm/pmap.h xen/common/Kconfig+42 -00 replies
7/15x86/domain_page: Remove the fast paths when mfn is not in the directmapxen/arch/x86/domain_page.c xen/arch/x86/include/asm/fixmap.h+75 -100 replies
8/15xen/page_alloc: Add a path for xenheap when there is no direct mapxen/common/page_alloc.c+41 -20 replies
9/15x86/setup: Leave early boot slightly earlierxen/arch/x86/setup.c+16 -20 replies
10/15xen/page_alloc: vmap heap nodes when they are outside the direct mapxen/common/page_alloc.c+17 -80 replies
11/15x86/setup: Do not create valid mappings when directmap=noxen/arch/x86/setup.c+66 -71 reply
12/15xen/arm64: mm: Use per-pCPU page-tablesxen/arch/arm/arm32/mmu/mm.c xen/arch/arm/arm64/mmu/mm.c xen/arch/arm/include/asm/arm32/mm.h +7 more+36 -400 replies
13/15xen/arm32: Hardwire zeroeth_table_offset to 0 on ARM_32xen/arch/arm/include/asm/lpae.h+1 -10 replies
14/15xen/arm64: Implement a mapcache for arm64xen/arch/arm/Kconfig xen/arch/arm/arm64/mmu/mm.c xen/arch/arm/include/asm/mm.h +3 more+71 -90 replies
15/15xen/arm64: Allow the admin to enable/disable the directmapdocs/misc/xen-command-line.pandoc xen/arch/arm/Kconfig xen/arch/arm/arm64/mmu/mm.c +2 more+43 -80 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 00/15] Remove the directmap

Hi,

I picked v4 of this series and run it through XenRT extensively, fixing crashes and errors as I hit them. Likewise, I've run it through Gitlab, fixing various CI failures. I listed all changes per patch. I fixed ARM to the extent that "Gitlab is happy when CONFIG_ONDEMAND_DIRECTMAP=y", but I didn't go much further than that.

I _THINK_ I've covered previously unaddressed feedback, but please speak up if I missed something. Otherwise, same old same old.

Cheers,
Alejandro

============== Original cover letter ==============

Hi all,

A few years ago, Wei Liu implemented a PoC to remove the directmap from Xen. The last version was sent by Hongyan Xia [1].

I will start with thanking both Wei and Hongyan for the initial work to upstream the feature. A lot of patches already went in and this is the last few patches missing to effectively enable the feature.

=== What is the directmap? ===

At the moment, on both arm64 and x86, most of the RAM is mapped in Xen address space. This means that domain memory is easily accessible in Xen.

=== Why do we want to remove the directmap? ===

(Summarizing my understanding of the previous discussion)

Speculation attacks (like Spectre SP1) rely on loading piece of memory in the cache. If the region is not mapped then it can't be loaded.

So removing reducing the amount of memory mapped in Xen will also reduce the surface attack.

=== What's the performance impact? ===

As the guest memory is not always mapped, then the cost of mapping will increase. I haven't done the numbers with this new version, but some measurement were provided in the previous version for x86.

=== Improvement possible ===

The known area to improve on x86 are:
* Mapcache: There was a patch sent by Hongyan:

     https://lore.kernel.org/xen-devel/4058e92ce21627731c49b588a95809dc0affd83a.1581015491.git.hongyxia@amazon.com/

* EPT: At the moment an guest page-tabel walk requires about 20 map/unmap. This will have an very high impact on the performance. We need to decide whether keep the EPT always mapped is a problem

The original series didn't have support for Arm64. But as there were some interest, I have provided a PoC.

There are more extra work for Arm64:
* The mapcache is quite simple. We would investigate the performance
* The mapcache should be made compliant to the Arm Arm (this is now more critical).
* We will likely have the same problem as for the EPT.
* We have no support for merging table to a superpage, neither free empty page-tables. (See more below)

=== Implementation ===

The subject is probably a misnomer. The directmap is still present but the RAM is not mapped by default. Instead, the region will still be used to map pages allocate via alloc_xenheap_pages().

The advantage is the solution is simple (so IHMO good enough for been merged as a tech preview). The disadvantage is the page allocator is not trying to keep all the xenheap pages together. So we may end up to have an increase of page table usage.

In the longer term, we should consider to remove the direct map completely and switch to vmap(). The main problem with this approach is it is frequent to use mfn_to_virt() in the code. So we would need to cache the mapping (maybe in the struct page_info).

=== Why arm32 is not covered? ===

On Arm32, the domheap and xenheap is always separated. So by design the guest memory is not mapped by default.

At this stage, it seems unnecessary to have to map/unmap xenheap pages every time they are allocated.

=== Why not using a separate domheap and xenheap? ===

While a separate xenheap/domheap reduce the page-table usage (all xenheap pages are contiguous and could be always mapped), it is also currently less scalable because the split is fixed at boot time (XXX:
Can this be dynamic?).

=== Future of secret-free hypervisor ===

There are some information in an e-mail from Andrew a few years ago:

https://lore.kernel.org/xen-devel/[email protected]/

Cheers,

[1] https://lore.kernel.org/xen-devel/[email protected]/

Alejandro Vallejo (1):
xen/arm32: Hardwire zeroeth_table_offset to 0 on ARM_32

Hongyan Xia (8):
x86: Create per-domain mapping for guest_root_pt
x86/pv: Rewrite how building PV dom0 handles domheap mappings
x86: Add a boot option to enable and disable the direct map x86/domain_page: Remove the fast paths when mfn is not in the
directmap
xen/page_alloc: Add a path for xenheap when there is no direct map x86/setup: Leave early boot slightly earlier xen/page_alloc: vmap heap nodes when they are outside the direct map x86/setup: Do not create valid mappings when directmap=no

Julien Grall (4):
xen/x86: Add support for the PMAP
xen/arm64: mm: Use per-pCPU page-tables xen/arm64: Implement a mapcache for arm64 xen/arm64: Allow the admin to enable/disable the directmap

Wei Liu (2):
x86/pv: Use copy_domain_page() to manage domheap pages during initrd
relocation
x86: Initialize mapcache for PV, HVM, and idle domains

 docs/misc/xen-command-line.pandoc      | 11 ++++
 xen/arch/arm/Kconfig                   |  3 +-
 xen/arch/arm/arm32/mmu/mm.c            |  1 +
 xen/arch/arm/arm64/mmu/mm.c            | 51 ++++++++++++++-
 xen/arch/arm/include/asm/arm32/mm.h    |  8 ---
 xen/arch/arm/include/asm/arm64/mm.h    |  7 +-
 xen/arch/arm/include/asm/domain_page.h | 13 ++++
 xen/arch/arm/include/asm/lpae.h        |  2 +-
 xen/arch/arm/include/asm/mm.h          |  8 +++
 xen/arch/arm/include/asm/mmu/layout.h  | 13 +++-
 xen/arch/arm/include/asm/mmu/mm.h      |  2 +
 xen/arch/arm/mmu/domain_page.c         | 45 +++++++++++--
 xen/arch/arm/mmu/pt.c                  | 12 ++--
 xen/arch/arm/mmu/setup.c               | 23 +++----
 xen/arch/arm/mmu/smpboot.c             | 16 +----
 xen/arch/arm/setup.c                   |  3 +
 xen/arch/x86/Kconfig                   |  1 +
 xen/arch/x86/domain.c                  | 13 +++-
 xen/arch/x86/domain_page.c             | 80 ++++++++++++++++------
 xen/arch/x86/include/asm/config.h      | 10 ++-
 xen/arch/x86/include/asm/domain.h      | 15 +++--
 xen/arch/x86/include/asm/fixmap.h      | 31 +++++++++
 xen/arch/x86/include/asm/mm.h          |  6 ++
 xen/arch/x86/include/asm/pmap.h        | 35 ++++++++++
 xen/arch/x86/mm.c                      | 13 ++++
 xen/arch/x86/pv/dom0_build.c           | 70 ++++++++++++++------
 xen/arch/x86/pv/domain.c               | 44 +++++++++++--
 xen/arch/x86/setup.c                   | 91 +++++++++++++++++++++++---
 xen/arch/x86/spec_ctrl.c               |  7 ++
 xen/arch/x86/x86_64/asm-offsets.c      |  1 +
 xen/arch/x86/x86_64/entry.S            |  9 ++-
 xen/common/Kconfig                     | 22 +++++++
 xen/common/page_alloc.c                | 68 ++++++++++++++++---
 xen/include/xen/mm.h                   | 11 ++++
 34 files changed, 613 insertions(+), 132 deletions(-)
 create mode 100644 xen/arch/arm/include/asm/domain_page.h
 create mode 100644 xen/arch/x86/include/asm/pmap.h
Signature · 1 line
2.47.1