Skip to content

Add support for distinct mac-mode and phy mode.

Boon Khai Ng u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net: dwc_eth_xgmac_socfpga: Add support for distinct mac-mode and phy mode.drivers/net/dwc_eth_xgmac_socfpga.c+25 -11 reply

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchTien Fong Chee
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [config 2 support v1 0/1] Add support for distinct mac-mode and phy mode.

This patch adds support for configuring the ethernet MAC mode independently from the PHY mode on our SoC FPGA board. Specifically, this is necessary for a scenario where the ethernet controller MAC is connected to the FPGA HVIO with a different GMII interface, and the FPGA output is routed to the PHY using a RGMII interface.

To support this configuration, a mechanism is introduced to handle separate MAC mode settings, ensuring that the MAC controller and PHY can operate correctly with their respective interface modes.

If mac-mode is not defined, the MAC mode will default to the PHY mode, ensuring compatibility and proper operation between the MAC and PHY.

Boon Khai Ng (1):
net: dwc_eth_xgmac_socfpga: Add support for distinct mac-mode and phy
mode.

 drivers/net/dwc_eth_xgmac_socfpga.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)
Signature · 1 line
2.26.2