IIO: ADCs: Sparse friendly claim of direct mode
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest8 patches 4 repliesIn review
- v129 patches 25 repliesSuperseded
Patches in v2 No applies recorded yet
Reviews trailers per patch
None of the 8 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.
| Patch | David Lechner |
|---|---|
| Series | R-b |
| 1/8 | |
| 2/8 | |
| 3/8 | |
| 4/8 | |
| 5/8 | |
| 6/8 | |
| 7/8 | |
| 8/8 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v2 0/8] IIO: ADCs: Sparse friendly claim of direct mode
From: Jonathan Cameron <[email protected]>
Resend of remaining unreviewed updates in drivers/iio/adc/*
I will eventually just apply these, but I'd much rather someone else took a quick look to check I haven't done anything stupid!
Note that a number of the drivers touched in this series have no obvious active maintainer, so it would be much appreciated if anyone has time to take a look! It is a large series so feel free to review any you have time to look at rather than feeling you need to look at the whole thing!
This is effectively part 3 of what will probably be around 5 series focused on moving from iio_device_claim/release_direct_mode() to iio_device_claim/release_direct(). The new form is more consistent with conditional locking semantics and sparse markings have been added that let us detect miss-balance between claim and release.
More details can be found in the cover letter of the first series:
https://lore.kernel.org/all/[email protected]/
This series focuses on the ADC drivers.
Jonathan Cameron (8):
iio: adc: vf610: Move claim of direct mode to caller of
vf610_read_sample and use guard(mutex)
iio: adc: vf610: Switch to sparse friendly
iio_device_claim/release_direct()
iio: adc: ti-ads1100: Use guard(mutex) to allow direct returns
iio: adc: ti-ads1100: Switch to sparse friendly
iio_device_claim/release_direct()
iio: adc: ti-ads1015: Use guard(mutex) and factor out code for
INFO_RAW
iio: adc: ti-ads1015: Switch to sparse friendly
iio_device_claim/release_direct()
iio: adc: mxs-lradc: Switch to sparse friendly
iio_device_claim/release_direct()
iio: adc: rcar: Switch to sparse friendly
iio_device_claim/release_direct()
drivers/iio/adc/mxs-lradc-adc.c | 14 ++- drivers/iio/adc/rcar-gyroadc.c | 9 +- drivers/iio/adc/ti-ads1015.c | 168 +++++++++++++------------------- drivers/iio/adc/ti-ads1100.c | 44 +++------ drivers/iio/adc/vf610_adc.c | 36 +++---- 5 files changed, 105 insertions(+), 166 deletions(-)
Signature · 1 line
2.48.1