Skip to content

Enable PWMs

Judith Mendez linux-arm-kernel linux-devicetree lkml 1 version Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: ti: k3-am62p5-sk: Enable PWMarch/arm64/boot/dts/ti/k3-am62p5-sk.dts+54 -00 replies
2/3arm64: dts: ti: k3-am62a7-sk: Enable PWMarch/arm64/boot/dts/ti/k3-am62a7-sk.dts+40 -00 replies
3/3arm64: dts: ti: k3-am625-sk: Enable PWMarch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi+40 -00 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchBryan Brattlof
SeriesR-b
1/3
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] Enable PWMs

This patch series enables PWM signal outputs on am625 SK, am62 lp SK, am62a7 SK, and am62p5 SK boards.

For am625 SK and am62 lp SK, add pinmux, eCAP, and eHRPWM nodes in the k3-am62x-sk-common.dtsi so as to not duplicate nodes in the board files.

Judith Mendez (3):
arm64: dts: ti: k3-am62p5-sk: Enable PWM
arm64: dts: ti: k3-am62a7-sk: Enable PWM
arm64: dts: ti: k3-am625-sk: Enable PWM

 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       | 40 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       | 54 +++++++++++++++++++
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 40 ++++++++++++++
 3 files changed, 134 insertions(+)
Signature · 1 line
2.49.0