Skip to content

Add SD card support to the Beagle-V-Fire

Eoin Dickson u-boot 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 3 repliesIn review
  2. v22 patches 2 repliesSuperseded
  3. v14 patches 3 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2gpio: add PolarFire SoC GPIO and Core GPIO driverdrivers/gpio/Kconfig drivers/gpio/Makefile drivers/gpio/mpfs_gpio.c+204 -02 replies
2/2spi: coreqspi: add xfer function for PolarFire SoCdrivers/spi/microchip_coreqspi.c+111 -21 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchLeo Yu-Chi Liang
1/2A-b
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] Add SD card support to the Beagle-V-Fire

From: Eoin Dickson <[email protected]>

This series add SD card support for the Beagle-V-Fire. The Beagle-V-Fire uses the Microchip coreqspi xfer function and a gpio chip select, so this series adds gpio support for PolarFire SoC and the xfer function into the Microchip coreqspi driver.

Eoin Dickson (2):
gpio: add PolarFire SoC GPIO and Core GPIO driver
spi: coreqspi: add xfer function for PolarFire SoC

 drivers/gpio/Kconfig             |   5 +
 drivers/gpio/Makefile            |   1 +
 drivers/gpio/mpfs_gpio.c         | 198 +++++++++++++++++++++++++++++++
 drivers/spi/microchip_coreqspi.c | 113 +++++++++++++++++-
 4 files changed, 315 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpio/mpfs_gpio.c
Signature · 1 line
2.34.1