Skip to content

arm64: dts: qcom: Add GPI DMA support for sc8280xp

Pengyu Luo linux-arm-msm linux-devicetree lkml 6 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest0 of 1 patch 0 repliesNew
  2. v3 posting 2/21 patch 0 repliesSuperseded
  3. v3 posting 1/22 patches 5 repliesApplied
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v23 patches2 repliesApplied
v1 posting 2/23 patches3 repliesSuperseded
v1 posting 1/21 patch2 repliesSuperseded

Changes in v4 from the cover letter

- remove double space (Konrad)
- remove the last interrupt of gpi_dma0 (Konrad)
- enable the gpi_dma nodes by default (Konrad, Dmitry)
- Link to v3: https://lore.kernel.org/linux-arm-msm/[email protected]

Patches in v4 No applies recorded yet

The patch the cover letter announces is not in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/1] arm64: dts: qcom: Add GPI DMA support for sc8280xp

This series adds GPI DMA support for the sc8280xp platform. This option is required only on devices where the touch panel is connected over SPI.

---
Changes in v4:
- remove double space (Konrad)
- remove the last interrupt of gpi_dma0 (Konrad)
- enable the gpi_dma nodes by default (Konrad, Dmitry)
- Link to v3: https://lore.kernel.org/linux-arm-msm/[email protected]

---
Changes in v3:
- fix shifted dma channels
- do not enable this on devices without connected SPI slave devices.
- Link to v2: https://lore.kernel.org/linux-arm-msm/[email protected]

Changes in v2:
- document dt-bindings (Dmitry)
- use describe in commit message (Eugen)
- enable it for sc8280xp based devices
- Link to v1: https://lore.kernel.org/linux-arm-msm/[email protected]

Pengyu Luo (1):
arm64: dts: qcom: sc8280xp: Describe GPI DMA controller nodes

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 361 +++++++++++++++++++++++++
 1 file changed, 361 insertions(+)
Signature · 1 line
2.50.1