Skip to content

sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling

Lukas Schmid u-boot 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 4 repliesIn review
  2. v12 patches 1 replySuperseded

Changes in v2 from the cover letter

- Renamed the defconfig to match "maker-model" style
- Use the default env offset and size
- Disable redundant env to have U-Boot and env fit into first MB of SPI-Flash
- Remove unused config options (SPI_BOOT, CMD_RTC, SPI_FLASH_BAR,

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2sunxi: setup_environment: do not generate a MAC address when one is set using nvmem-cellsboard/sunxi/board.c+14 -12 replies
2/2configs: add support for NetCube Systems Kumquatconfigs/netcube_kumquat_defconfig+45 -01 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchAndre Przywara
1/2
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] sunxi: Add NetCube Systems Kumquat support and fix nvmem MAC handling

Changes in v2:
- Renamed the defconfig to match "maker-model" style
- Use the default env offset and size
- Disable redundant env to have U-Boot and env fit into first MB of SPI-Flash
- Remove unused config options (SPI_BOOT, CMD_RTC, SPI_FLASH_BAR,

    USB_ETHER_...)

- Update mtdparts layout to reflect new environment layout

This series adds a defconfig for the NetCube Systems Kumquat and fixes and issue with setup_environment ignoring the mac-address loaded using nvmem-cells

Note: This series is based on U-Boot's next branch because it depends on the sun8i-v3s-netcube-kumquat.dts device tree, which was recently synced from upstream Linux and is not yet available in master.

---
Lukas Schmid (2):
sunxi: setup_environment: do not generate a MAC address when one is
set using nvmem-cells
configs: add support for NetCube Systems Kumquat

 board/sunxi/board.c               | 15 ++++++++++-
 configs/netcube_kumquat_defconfig | 45 +++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 1 deletion(-)
 create mode 100644 configs/netcube_kumquat_defconfig
Signature · 1 line
2.39.5