RFC Introduce dummy regulator consumer
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest2 patches 9 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | regulator: Add dummy regulator consumer bindingDocumentation/ | +39 | 1 reply | |
| 2/2 | regulator: Introduce dummy regulator consumer driverdrivers/ drivers/ drivers/ | +95 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [RFC PATCH v1 0/2] Introduce dummy regulator consumer
Introduce a very simple dummy consumer driver. Designed to consume a single regulator 'vdd', the driver will power-on on probe and PM suspend (if supported), power-off on remove and PM resume (if enabled).
There are two main reasons for this driver:
1. Create a pseudo-consumer in place of real devices which are not or cannot be described in the device-tree. Examples would be integrated USB UVC camera (present on some arm64 laptops) or dedicated keyboard backlight regulator (hypothetical). Instead of leaving regulator without consumer and regulator-always-on property, one could bind to dummy consumer to save some power during suspend.
2. A great development tool.
Tested on Asus Zenbook A14 with webcamera indicator LED imitating vreg enable pin.
Aleksandrs Vinarskis (2):
regulator: Add dummy regulator consumer binding
regulator: Introduce dummy regulator consumer driver
.../bindings/regulator/dummy-consumer.yaml | 39 +++++++++ drivers/regulator/Kconfig | 9 ++ drivers/regulator/Makefile | 1 + drivers/regulator/dummy-consumer.c | 85 +++++++++++++++++++ 4 files changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/dummy-consumer.yaml create mode 100644 drivers/regulator/dummy-consumer.c
Signature · 1 line
2.45.2