Skip to content

clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset

Chen-Yu Tsai linux-arm-kernel linux-clk linux-devicetree linux-sunxi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 resetinclude/dt-bindings/reset/sun55i-a523-r-ccu.h+1 -03 replies
2/2clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 resetdrivers/clk/sunxi-ng/ccu-sun55i-a523-r.c+1 -02 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchStephen BoydAndre PrzywaraConor Dooley
1/2A-b R-b A-b
2/2A-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v1 thread

Cover letter [PATCH 0/2] clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset

From: Chen-Yu Tsai <[email protected]>

There is a PPU0 reset control bit in the same register as the PPU1 reset control. This missing reset control is for the PCK-600 unit in the SoC. Manual tests show that the reset control indeed exists, and if not configured, the system will hang when the PCK-600 registers are accessed.

This series adds a reset entry for it at the end of the existing ones, in both the DT binding header file and the driver.

I will take both patches through the sunxi trees since I need the header file change for a subsequent patch series.

Please have a look.

ChenYu

Chen-Yu Tsai (2):
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset

 drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c      | 1 +
 include/dt-bindings/reset/sun55i-a523-r-ccu.h | 1 +
 2 files changed, 2 insertions(+)
Signature · 1 line
2.39.5