Skip to content

net: phy: bcm54811: Fix the PHY initialization

Kamil Horák - 2N linux-devicetree lkml netdev 4 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest posting 2/23 patches 0 repliesNew
  2. v3 posting 1/23 patches 3 repliesSuperseded
  3. v23 patches 9 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v13 patches2 repliesSuperseded

Patches in v3 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3net: phy: MII-Lite PHY interface modedrivers/net/phy/broadcom.c drivers/net/phy/phy-core.c drivers/net/phy/phy_caps.c +3 more+23 -00 replies
2/3dt-bindings: ethernet-phy: add MII-Lite phy interface typeDocumentation/devicetree/bindings/net/ethernet-controller.yaml+1 -00 replies
3/3net: phy: bcm54811: Fix the PHY initializationdrivers/net/phy/broadcom.c include/linux/brcmphy.h+20 -40 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH net-next v3 0/3] net: phy: bcm54811: Fix the PHY initialization

From: "Kamil Horák (2N)" <[email protected]>

PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
their two-wire PHYs. It can be used with most Ethernet controllers under certain limitations (no half-duplex link modes etc.).

PATCH 2 - Add MII-Lite PHY interface type

PATCH 3 - Fix the BCM54811 PHY initialization so that it conforms
to the datasheet regarding a reserved bit in the LRE Control register, which must be written to zero after every device reset.

Kamil Horák (2N) (3):
net: phy: MII-Lite PHY interface mode
dt-bindings: ethernet-phy: add MII-Lite phy interface type
net: phy: bcm54811: Fix the PHY initialization

 .../bindings/net/ethernet-controller.yaml     |  1 +
 drivers/net/phy/broadcom.c                    | 30 ++++++++++++++++---
 drivers/net/phy/phy-core.c                    |  1 +
 drivers/net/phy/phy_caps.c                    |  4 +++
 drivers/net/phy/phylink.c                     |  1 +
 include/linux/brcmphy.h                       |  7 +++++
 include/linux/phy.h                           |  4 +++
 7 files changed, 44 insertions(+), 4 deletions(-)
Signature · 1 line
2.39.5