Skip to content

RFC drm/i915/display: Avoid unsupported 300Hz output mode on a TUXEDO device

Werner Sembach dri-devel intel-gfx intel-xe lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest1 patch 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1drm/i915/display: Avoid unsupported 300Hz output mode on a TUXEDO devicedrivers/gpu/drm/i915/display/intel_dp.c drivers/gpu/drm/i915/display/intel_quirks.c drivers/gpu/drm/i915/display/intel_quirks.h+36 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/1] drm/i915/display: Avoid unsupported 300Hz output mode on a TUXEDO device

RFC because I'm not sure if this is the right approach.

The flicker manifests ever few seconds 1-3 black frames in quick succession.

On windows 300Hz can not be selected for the iGPU, but the panel advertises it.

A cleaner solution would probably to go over the pixel clock, but for this device there is only one 300Hz mode in the panels edid and that is at the nativ resolution. Chroma subsampling was not tested as linux afaik offers no way to easily enforce it for intel gpus.

Tim Guttzeit (1):
drm/i915/display: Avoid unsupported output mode with 300Hz on TUXEDO
device

 drivers/gpu/drm/i915/display/intel_dp.c     |  5 ++++
 drivers/gpu/drm/i915/display/intel_quirks.c | 30 +++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_quirks.h |  1 +
 3 files changed, 36 insertions(+)
Signature · 1 line
2.43.0