Skip to content

arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio-hog on lvds_dsi_sel

[email protected] imx linux-arm-kernel linux-devicetree lkml 1 version Applied

Status from this message: Applied both, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: freescale: imx8mp-toradex-smarc: fix lvds dsi mux gpioarch/arm64/boot/dts/freescale/imx8mp-toradex-smarc-dev.dts arch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi+2 -50 replies
2/2arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio hogarch/arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi+0 -80 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/2] arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio-hog on lvds_dsi_sel

From: Max Krummenacher <[email protected]>

The LVDS_DSI_SEL does not leave the SoM, so do its pinmuxing on the SoM dtsi and don't leave that to a carrier board dts file.

Using a pull down on the LVDS_DSI_SEL signal is enough to have the signal not floating and have the SoM in a defined state.
Thus remove the gpio-hog used on the line and leave this to carrier board dts files or overlays to use the signal as needed.

Max Krummenacher (2):
arm64: dts: freescale: imx8mp-toradex-smarc: fix lvds dsi mux gpio
arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio hog

 .../boot/dts/freescale/imx8mp-toradex-smarc-dev.dts    |  5 -----
 .../arm64/boot/dts/freescale/imx8mp-toradex-smarc.dtsi | 10 ++--------
 2 files changed, 2 insertions(+), 13 deletions(-)
Signature · 1 line
2.42.0