Skip to content

PCI: Reset LBMS state before clearing DPC status.

Matthew W Carlis linux-pci 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1PCI: Reset LBMS state before clearing DPC status.drivers/pci/pcie/dpc.c+10 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] PCI: Reset LBMS state before clearing DPC status.

I have observed DPC setting LBMS and previous assertions of LBMS being carried into wait for secondary bus. When this happens it is possible for the link to be forced to 2.5GT/s if the EP is slow to enter link training. Waiting for secondary bus after clearing DPC status should give the link a "fresh start" from the perspective of LBMS tracking. Therefore DPC should reset LBMS state before clearing DPC status.

Matthew W Carlis (1):
PCI: Reset LBMS state before clearing DPC status.

 drivers/pci/pcie/dpc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
Signature · 1 line
2.46.0