Skip to content

xhci features for usb-next

Mathias Nyman linux-usb 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3usb: xhci: Avoid showing errors during surprise removaldrivers/usb/host/xhci-ring.c+5 -20 replies
2/3usb: xhci: Avoid showing warnings for dying controllerdrivers/usb/host/xhci.c+4 -20 replies
3/3usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Commanddrivers/usb/host/xhci-mem.c+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] xhci features for usb-next

Hi Greg

A few small xhci changes for usb-next that have been sitting in the list.

The "avg_trb_len = 8" patch is not marked for stable as it only helps a company with their custom virtual xHC hardware development.
They have a stricter interpretation of an ambiguous part of the xHCI spec. I don't object to their interpretation, but other existing xHC hardware seem to work with either way, so skipping the stable flag for now.

Thanks
Mathias

Jay Chen (1):
usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command

Mario Limonciello (2):
usb: xhci: Avoid showing errors during surprise removal
usb: xhci: Avoid showing warnings for dying controller

 drivers/usb/host/xhci-mem.c  | 2 ++
 drivers/usb/host/xhci-ring.c | 7 +++++--
 drivers/usb/host/xhci.c      | 6 ++++--
 3 files changed, 11 insertions(+), 4 deletions(-)
Signature · 1 line
2.43.0