Skip to content

Disable CDL probing on ATA with mpt2sas and mpt3sas

Damien Le Moal linux-scsi 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2scsi: Allow SCSI hosts to force-disable CDL support probingdrivers/scsi/scsi.c include/scsi/scsi_host.h+11 -10 replies
2/2scsi: mpt3sas: Disable Command Duration Limit Probingdrivers/scsi/mpt3sas/mpt3sas_scsih.c+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Disable CDL probing on ATA with mpt2sas and mpt3sas

Martin,

Friedrich reported issues with HBAs using the mpt3sas driver and CDL probe, particularly on device hot-plug. These 2 patches address this issue by force-disabling CDL probing with mpt2sas and mpt3sas. This has no effect on feature limitation since the firmware of all HBAs driven by mpt2sas and mpt3sas do not have a SAT implementation capable of handling CDL on ATA devices.

Damien Le Moal (2):
scsi: Allow SCSI hosts to force-disable CDL support probing
scsi: mpt3sas: Disable Command Duration Limit Probing

 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 ++
 drivers/scsi/scsi.c                  | 6 +++++-
 include/scsi/scsi_host.h             | 6 ++++++
 3 files changed, 13 insertions(+), 1 deletion(-)
Signature · 1 line
2.50.1