Skip to content

Add support for AM62P SR1.2

Judith Mendez linux-arm-kernel linux-mmc lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/22 patches 3 repliesIn review
  2. v2 posting 1/22 patches 5 repliesSuperseded
  3. v12 patches 3 repliesSuperseded

Changes in v2 from the cover letter

- Drop binding and DT patches
- Move disable HS400 print to sdhci_am654_init & only print if caps are already enabled, according to Andrew's review
- Completely refactor/change patch 2/4 for k3-socinfo to not add a new item to reg property, find GP_SW as an offset of JTAG ID. This approach is based off-of Krzysztof's review.

Patches in v2 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2soc: ti: k3-socinfo: Add support for AM62P variantsdrivers/soc/ti/k3-socinfo.c+25 -22 replies
2/2mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1drivers/mmc/host/sdhci_am654.c+18 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] Add support for AM62P SR1.2

This patch series adds support for the AM62P SR1.2 silicon revision by adding logic in k3-socinfo to detect AM62P variants.

This also disables HS400 support for AM62P SR1.0 and SR1.1 in sdhci host driver and enable by default for AM62P SR1.2.

Tested against AM62P SR1.2, SR1.1, SR1.0 and AM62X SK. Log for AM62P SR1.2:
https://gist.github.com/jmenti/3d605dcd9445c2fac86c626bfa519103

Changes since v1:
- Drop binding and DT patches
- Move disable HS400 print to sdhci_am654_init & only print if caps are already enabled, according to Andrew's review
- Completely refactor/change patch 2/4 for k3-socinfo to not add a new item to reg property, find GP_SW as an offset of JTAG ID. This approach is based off-of Krzysztof's review.

Link to v1:
https://lore.kernel.org/linux-mmc/[email protected]

Judith Mendez (2):
soc: ti: k3-socinfo: Add support for AM62P variants
mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1

 drivers/mmc/host/sdhci_am654.c | 18 ++++++++++++++++++
 drivers/soc/ti/k3-socinfo.c    | 27 +++++++++++++++++++++++++--
 2 files changed, 43 insertions(+), 2 deletions(-)

--
2.49.0