Skip to content

Add the s32g2 and s32g3 FTM PWM support

Daniel Lezcano linux-devicetree linux-pwm lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 3 repliesIn review
  2. v22 patches 2 repliesSuperseded
  3. v12 patches 4 repliesSuperseded

Changes in v3 from the cover letter

- Fixed dt-bindings subject prefix

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml+8 -31 reply
2/2pwm: Add the S32G support in the Freescale FTM driverdrivers/pwm/pwm-fsl-ftm.c+33 -20 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchConor Dooley
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] Add the s32g2 and s32g3 FTM PWM support

The NXP Automotive platform s32g2 and s32g3 have on their board a FlexTimer (FTM) dedicated for the PWM. The same IP is found on the Freescale Vybrid Family and the i.MX8 SoCs. However, there is a small difference with some registers not available on the s32g2/3 and 6 channels instead of 8.

These two patches provide the DT bindings for the s32g2/3 compatible strings and the code to deal with the FTM difference.

Changelog:
v3:
- Fixed dt-bindings subject prefix
v2:
- Merged the two booleans for the regmap holes check
- Clarified why this is needed in the changelog
v1:
- Initial post

Daniel Lezcano (1):
dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and

    s32g3

Ghennadi Procopciuc (1):
pwm: Add the S32G support in the Freescale FTM driver

 .../bindings/pwm/fsl,vf610-ftm-pwm.yaml       | 11 ++++--
 drivers/pwm/pwm-fsl-ftm.c                     | 35 +++++++++++++++++--
 2 files changed, 41 insertions(+), 5 deletions(-)
Signature · 1 line
2.43.0