Skip to content

mpt3sas: Improve device readiness handling and event recovery

Ranjan Kumar linux-scsi 2 versions – Applied

Status from this message: Applied to 6.20/scsi-staging, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest6 patches 2 repliesApplied
  2. v15 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Fixed test robot build warnings
- Fixed W=1 compilation warnings

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/6mpt3sas: Added no_turs flag to device unblock logicdrivers/scsi/mpt3sas/mpt3sas_scsih.c+11 -30 replies
2/6mpt3sas: Added issue_scsi_cmd_to_bringup_drive module parameter part-1drivers/scsi/mpt3sas/mpt3sas_scsih.c+9 -00 replies
3/6mpt3sas: improve device discovery and readiness handling for slow devices part-2drivers/scsi/mpt3sas/mpt3sas_base.c drivers/scsi/mpt3sas/mpt3sas_base.h drivers/scsi/mpt3sas/mpt3sas_scsih.c+1110 -170 replies
4/6mpt3sas: Add firmware event requeue support for busy devicesdrivers/scsi/mpt3sas/mpt3sas_scsih.c+112 -180 replies
5/6mpt3sas: Add configurable command retry limit for slow-to-respond devicesdrivers/scsi/mpt3sas/mpt3sas_scsih.c+78 -60 replies
6/6mpt3sas: Fixed the W=1 compilation warningdrivers/scsi/mpt3sas/mpt3sas_base.c+4 -40 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/6] mpt3sas: Improve device readiness handling and event recovery

This patch series enhances the mpt3sas driver’s device bring-up, readiness detection, and event recovery mechanisms to improve robustness in environments with slow-responding or transient SAS/PCIe devices.

The series introduces optional control over issuing TEST UNIT READY (TUR) commands during device unblocking, configurable retry limits, and a mechanism to requeue firmware topology events when devices are temporarily busy. Together, these updates reduce discovery failures and improve recovery reliability following firmware or link events.

Change since v1:
- Fixed test robot build warnings
- Fixed W=1 compilation warnings

Ranjan Kumar (6):
mpt3sas: Added no_turs flag to device unblock logic
mpt3sas: Added issue_scsi_cmd_to_bringup_drive module parameter part-1
mpt3sas: improve device discovery and readiness handling for slow
devices part-2
mpt3sas: Add firmware event requeue support for busy devices
mpt3sas: Add configurable command retry limit for slow-to-respond
devices
mpt3sas: Fixed the W=1 compilation warning

 drivers/scsi/mpt3sas/mpt3sas_base.c  |   14 +-
 drivers/scsi/mpt3sas/mpt3sas_base.h  |    4 +
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1458 ++++++++++++++++++++++++--
 3 files changed, 1376 insertions(+), 100 deletions(-)
Signature · 1 line
2.47.3