Skip to content

riscv: spacemit: initial support for OrangePi R2S

[email protected] linux-devicetree linux-riscv lkml spacemit 4 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest2 patches 4 repliesApplied
  2. v32 patches 7 repliesSuperseded
  3. v22 patches 3 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v14 patches4 repliesSuperseded

Changes in v4 from the cover letter

- Improve commit messages to make it clear that the Ky X1 SoC is identical in die and package to SpacemiT K1, making it right to add the board to SpacemiT K1 DT bindings.

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: riscv: spacemit: Add OrangePi R2S boardDocumentation/devicetree/bindings/riscv/spacemit.yaml+1 -02 replies
2/2riscv: dts: spacemit: Add OrangePi R2S board device treearch/riscv/boot/dts/spacemit/Makefile arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts+91 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchYixun LanKrzysztof Kozlowski
SeriesR-b
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/2] riscv: spacemit: initial support for OrangePi R2S

From: Michael Opdenacker <[email protected]>

This adds initial support for the OrangePi R2S board [1], which is marketed as using the Ky X1 SoC but is identical in die and package to the SpacemiT K1 SoC [2].

What makes this board attractive is its 4 Ethernet ports (2 x Gigagit RGMII with an external Motorcomm YT8531C PHY, and 2 x 2.5 Gigabit Ethernet with RTL8125BG on an internal PCI Express bus), its small form factor and its attractive pricing like other OrangePi boards.

What is supported:
- Serial console on serial UART
- 8 GB eMMC
- 2x Gigabit RGMII Ethernet ports

This patch series is based on Spacemit's Linux tree, "linux-for-next" branch [3]

Changes in V4
- Improve commit messages to make it clear that the Ky X1 SoC is identical in die and package to SpacemiT K1, making it right to add the board to SpacemiT K1 DT bindings.

Changes in V3
- DT bindings: insert new compatible string in alphanumeric order (feedback from Krzysztof Kozlowski)
- OrangePi R2S: remove useless description text in commit message (feedback from Yixun Lan)

Changes in V2
- Squash 3 commits for initial DTS, Ethernet & PDMA, and eMMC

==========
eMMC tests
==========

Read tests
----------

hdparm -t --direct /dev/mmcblk0

/dev/mmcblk0:
Timing O_DIRECT disk reads: 846 MB in 3.01 seconds = 281.52 MB/sec

Write tests
-----------

dd if=/dev/zero of=/dev/mmcblk0p2 bs=4M oflag=direct status=progress 7600078848 bytes (7.6 GB, 7.1 GiB) copied, 127 s, 59.8 MB/s
dd: error writing '/dev/mmcblk0p2': No space left on device 1825+0 records in
1824+0 records out
7650410496 bytes (7.7 GB, 7.1 GiB) copied, 127.866 s, 59.8 MB/s

==============
Ethernet tests
==============

Tests on eth0
-------------

root@orangepi-rv2-mainline:~# iperf3 -c 172.24.0.1
Connecting to host 172.24.0.1, port 5201
[ 5] local 172.24.0.2 port 51354 connected to 172.24.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 113 MBytes 947 Mbits/sec 0 395 KBytes
[ 5] 1.00-2.00 sec 113 MBytes 945 Mbits/sec 0 395 KBytes
[ 5] 2.00-3.00 sec 112 MBytes 936 Mbits/sec 0 395 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec 0 395 KBytes
[ 5] 4.00-5.00 sec 112 MBytes 941 Mbits/sec 0 395 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 940 Mbits/sec 0 409 KBytes
[ 5] 6.00-7.00 sec 113 MBytes 948 Mbits/sec 0 409 KBytes
[ 5] 7.00-8.00 sec 112 MBytes 940 Mbits/sec 0 409 KBytes
[ 5] 8.00-9.00 sec 112 MBytes 941 Mbits/sec 0 414 KBytes
[ 5] 9.00-10.03 sec 113 MBytes 919 Mbits/sec 0 414 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.03 sec 1.10 GBytes 940 Mbits/sec 0 sender
[ 5] 0.00-10.04 sec 1.10 GBytes 939 Mbits/sec receiver

iperf Done.

root@orangepi-rv2-mainline:~# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 172.24.0.1, port 38326
[ 5] local 172.24.0.2 port 5201 connected to 172.24.0.1 port 38332
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 112 MBytes 935 Mbits/sec
[ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec
[ 5] 2.00-3.00 sec 112 MBytes 941 Mbits/sec
[ 5] 3.00-4.00 sec 112 MBytes 941 Mbits/sec
[ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec
[ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec
[ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec
[ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec
[ 5] 8.00-9.00 sec 112 MBytes 941 Mbits/sec
[ 5] 9.00-10.00 sec 112 MBytes 943 Mbits/sec
[ 5] 10.00-10.01 sec 384 KBytes 725 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.01 sec 1.10 GBytes 941 Mbits/sec receiver

Tests on eth1
------------------

root@orangepi-rv2-mainline:~# iperf3 -c 172.24.0.1
Connecting to host 172.24.0.1, port 5201
[ 5] local 172.24.0.2 port 60564 connected to 172.24.0.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 113 MBytes 947 Mbits/sec 0 423 KBytes
[ 5] 1.00-2.00 sec 113 MBytes 945 Mbits/sec 0 423 KBytes
[ 5] 2.00-3.00 sec 112 MBytes 943 Mbits/sec 0 423 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 938 Mbits/sec 0 423 KBytes
[ 5] 4.00-5.00 sec 112 MBytes 944 Mbits/sec 0 423 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 936 Mbits/sec 0 423 KBytes
[ 5] 6.00-7.00 sec 112 MBytes 943 Mbits/sec 0 423 KBytes
[ 5] 7.00-8.00 sec 112 MBytes 940 Mbits/sec 0 423 KBytes
[ 5] 8.00-9.00 sec 113 MBytes 951 Mbits/sec 0 639 KBytes
[ 5] 9.00-10.01 sec 112 MBytes 934 Mbits/sec 0 639 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.01 sec 1.10 GBytes 943 Mbits/sec 0 sender
[ 5] 0.00-10.02 sec 1.10 GBytes 940 Mbits/sec receiver

iperf Done.

root@orangepi-rv2-mainline:~# iperf3 -s 172.24.0.1
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 172.24.0.1, port 49628
[ 5] local 172.24.0.2 port 5201 connected to 172.24.0.1 port 49640
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 112 MBytes 934 Mbits/sec
[ 5] 1.00-2.00 sec 112 MBytes 942 Mbits/sec
[ 5] 2.00-3.00 sec 112 MBytes 942 Mbits/sec
[ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec
[ 5] 4.00-5.00 sec 112 MBytes 941 Mbits/sec
[ 5] 5.00-6.00 sec 112 MBytes 942 Mbits/sec
[ 5] 6.00-7.00 sec 112 MBytes 942 Mbits/sec
[ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec
[ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec
[ 5] 9.00-10.00 sec 112 MBytes 941 Mbits/sec
[ 5] 10.00-10.01 sec 640 KBytes 1.14 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.01 sec 1.10 GBytes 941 Mbits/sec receiver

Michael Opdenacker (2):
dt-bindings: riscv: spacemit: Add OrangePi R2S board
riscv: dts: spacemit: Add OrangePi R2S board device tree

 .../devicetree/bindings/riscv/spacemit.yaml   |  1 +
 arch/riscv/boot/dts/spacemit/Makefile         |  1 +
 .../boot/dts/spacemit/k1-orangepi-r2s.dts     | 90 +++++++++++++++++++
 3 files changed, 92 insertions(+)
 create mode 100644 arch/riscv/boot/dts/spacemit/k1-orangepi-r2s.dts

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv