Skip to content

Fix unaligned queue_limit->io_opt on SAS and 4KN disk

Lukas Herbolt linux-scsi 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1scsi: sd: Rounddown host->opt_sectors to logicaldrivers/scsi/sd.c+2 -14 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] Fix unaligned queue_limit->io_opt on SAS and 4KN disk

If there is an SAS attached disk we set the SCSI host opt_sectors in sas_host_setup() to either dma_opt_mapping_size() or host->max_sectors this value can be later assigned to the device queue_limit as io_opt, but there is no further check if the io_opt is aligned with the device limits.

Rounding down to device logical_sectors will keep the io_opt large enough to keep benefit of bigger IO but still aligned within the device limits.

Lukas Herbolt (1):
scsi: sd: Rounddown host->opt_sectors to logical sectors reported by
the disk.

 drivers/scsi/sd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Signature · 1 line
2.51.1