Skip to content

riscv: dts: starfive: Add OrangePi RV board

E Shattow linux-devicetree linux-riscv lkml 1 version Applied

Status from this message: Applied to riscv-dt-for-next, thanks! I know I mentioned waiting for

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest2 patches 17 repliesApplied

Changes in v3 from the cover letter

- enable active high mmc1 card detect gpio
- drop delete-node from mmc0 reset pins following commit fa939a287224 ("dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards")
- sort phy0 properties rx before tx
- revise commit description of SoC peripherals as list
- revise commit description of compatible binding

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: riscv: starfive: add xunlong,orangepi-rvDocumentation/devicetree/bindings/riscv/starfive.yaml+1 -011 replies
2/2riscv: dts: starfive: add Orange Pi RVarch/riscv/boot/dts/starfive/Makefile arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts+77 -04 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchEmil Renner Berthing
SeriesA-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] riscv: dts: starfive: Add OrangePi RV board

Icenowy is busy and so with their permission I have applied v2 review feedback. Additionally I revise the commit messages. This should now be in good shape for -next

- E

Changes since v2:
- enable active high mmc1 card detect gpio
- drop delete-node from mmc0 reset pins following commit fa939a287224 ("dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards")
- sort phy0 properties rx before tx
- revise commit description of SoC peripherals as list
- revise commit description of compatible binding

Changes in v2:
- Property order change mentioned in the review of v1.
- Added Wi-Fi (along with the always on VCC3V3_PCIE regulator, which is used to power up WIFI_3V3). The OOB IRQ is still not possible to use because of some incompatibility between StarFive pinctrl driver and brcmfmac.
- Removed the LED because it's in common DTSI.

Icenowy Zheng (2):
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: add Orange Pi RV

 .../devicetree/bindings/riscv/starfive.yaml   |  1 +
 arch/riscv/boot/dts/starfive/Makefile         |  1 +
 .../boot/dts/starfive/jh7110-orangepi-rv.dts  | 76 +++++++++++++++++++
 3 files changed, 78 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts

base-commit: 1088d49b626487777913079bef0db3adef4bfb4a

Signature · 1 line
2.50.0