Skip to content

Add OrangePi 6 Plus board

Gary Yang linux-arm-kernel linux-devicetree lkml 4 versions – Applied

Status from this message: Applied, Thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest2 patches 3 repliesApplied
  2. v32 patches 7 repliesSuperseded
  3. v22 patches 3 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v12 patches1 replySuperseded

Changes in v4 from the cover letter

-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: arm: cix: add OrangePi 6 Plus boardDocumentation/devicetree/bindings/arm/cix.yaml+4 -22 replies
2/2arm64: dts: cix: Add OrangePi 6 Plus board supportarch/arm64/boot/dts/cix/Makefile arch/arm64/boot/dts/cix/sky1-xcp.dts+84 -01 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/2] Add OrangePi 6 Plus board

Patch 1: add compatible strings for OrangePi 6 Plus board Patch 2: add dts file for OrangePi 6 Plus board

OrangePi 6 Plus board is powered by Cix Sky1. You could find brief introduction for SoC and related boards at:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-6-Plus.html

Currently, to run upstream kernel at OrangePi 6 Plus board, you need to use BIOS released by OrangePi, and add "clk_ignore_unused=1" at bootargs.
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-6-Plus.html

v4 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board

v3 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board
- Fix the commit message length within 75 words

v2 changes:
-Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-xcp.dtb
- Fix the description of board

Gary Yang (2):
dt-bindings: arm: cix: add OrangePi 6 Plus board
arm64: dts: cix: Add OrangePi 6 Plus board support

 .../devicetree/bindings/arm/cix.yaml          |  6 +-
 arch/arm64/boot/dts/cix/Makefile              |  1 +
 arch/arm64/boot/dts/cix/sky1-xcp.dts          | 83 +++++++++++++++++++
 3 files changed, 88 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/cix/sky1-xcp.dts
Signature · 1 line
2.49.0