Skip to content

ath11k: support IPQ9574

Alexandru Gagniuc ath11k linux-devicetree linux-wireless lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 2 repliesIn review
  2. v12 patches 1 replySuperseded

Changes in v2 from the cover letter

- place compatible strings after instead of before ipq8074

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt: bindings: net: ath11k: add IPQ9574 compatibleDocumentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml+3 -01 reply
2/2wifi: ath11k: support ipq9574drivers/net/wireless/ath/ath11k/ahb.c drivers/net/wireless/ath/ath11k/core.c drivers/net/wireless/ath/ath11k/core.h +2 more+139 -00 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] ath11k: support IPQ9574

This is my attempt to make ath11k work on IPQ9574. IPQ9574 is intended for wifi-7 devices, so it seems the exception rather than the rule to pair it with a wifi-6 chip. That's exactly what my Archer BE550 does.

This consists of a wifi-6 (QCN5024) chip connected via PCIe to the SoC, but exposed to the OS via AHB. The Q6 firmware [4] requires remoteproc support introduced in a separate series [3]. The QMI firmware interface is very similar to IPQ6018, such that almost no new code is needed.

I am not including the wifi@c000000 devicetree node in this series, as it depends on nodes from the remoteproc series [3].

I have been successfully doogfooding this for a few of weeks in AP mode. There dependencies to this series. [2] is a compile-time dependency, whereas [1] and [3] are needed for full functionality. I was adivsed to leave [1] and [2] as separate patches and not add them to this series. `

[1] https://lore.kernel.org/ath11k/[email protected]/
[2] https://lore.kernel.org/ath11k/[email protected]/
[3] https://lore.kernel.org/linux-remoteproc/[email protected]/
[4] https://github.com/quic/upstream-wifi-fw

Changes since v1:
- place compatible strings after instead of before ipq8074

Alexandru Gagniuc (2):
dt: bindings: net: ath11k: add IPQ9574 compatible
wifi: ath11k: support ipq9574

 .../bindings/net/wireless/qcom,ath11k.yaml    |  3 +
 drivers/net/wireless/ath/ath11k/ahb.c         |  4 +
 drivers/net/wireless/ath/ath11k/core.c        | 82 +++++++++++++++++++
 drivers/net/wireless/ath/ath11k/core.h        |  1 +
 drivers/net/wireless/ath/ath11k/hw.c          | 51 ++++++++++++
 drivers/net/wireless/ath/ath11k/hw.h          |  1 +
 6 files changed, 142 insertions(+)

--
2.45.1