Skip to content

arm64: dts: rockchip: Add rk3576 evb2 board

Chaoyi Chen linux-arm-kernel linux-devicetree linux-rockchip lkml 5 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 1 replyApplied
  2. v42 patches 5 repliesSuperseded
  3. v33 patches 8 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v22 patches23 repliesSuperseded
v12 patches3 repliesSuperseded

Changes in v5 from the cover letter

- Link to v4: https://lore.kernel.org/all/[email protected]/
- Remove disable-wp for sdio.
- Add vmmc-supply for sdmmc.
- Remove tx-internal-delay-ps for RGMII PHY.

Patches in v5 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: arm: rockchip: Add rk3576 evb2 boardDocumentation/devicetree/bindings/arm/rockchip.yaml+3 -10 replies
2/2arm64: dts: rockchip: Add rk3576 evb2 boardarch/arm64/boot/dts/rockchip/Makefile arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts+1021 -00 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchKrzysztof KozlowskiAlexey Charkov
1/2A-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/2] arm64: dts: rockchip: Add rk3576 evb2 board

From: Chaoyi Chen <[email protected]>

Hi,

This series add support for rk3576 evb2 board.

General features for rk3576 evb2 board:
- Rockchip RK3576
- LPDDR4/4X
- eMMC5.1
- RK806-2x2pcs + DiscretePower
- 1x HDMI2.1 TX / HDMI2.0 RX
- 1x full size DP1.4 TX (Only 2 Lanes)
- 2x 10/100/1000M Ethernet
- 5x SATA3.0 7Pin Slot
- 2x USB3.2 Gen1 Host
- 3x USB2.0 Host
- WIFI/BT
- ...

To make the USB hub work, the additional patch from usb-next is required:

[0] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=00fcc9c86a134c488fd857b5460a7925228272c1
[1] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=fa3bb5011f33cccd246072954e64d64483d0d774

Changes in v5:
- Link to v4: https://lore.kernel.org/all/[email protected]/
- Remove disable-wp for sdio.
- Add vmmc-supply for sdmmc.
- Remove tx-internal-delay-ps for RGMII PHY.

Changes in v4:
- Link to v3: https://lore.kernel.org/all/[email protected]/
- Move the USB hub code into a separate patch series, and that series have already been merged into usb-next.
- Fix supply and reset for usb hub.
- Add cd-gpios for sdmmc.

Changes in v3:
- Link to v2: https://lore.kernel.org/all/[email protected]/
- Add binding for WCH CH334/CH335 hub controller.
- Add alias for mmc.
- Rename some usb vbus regulator.
- Add DP regulator.
- Change gmac phy-mode to rgmii-id.
- Add target-supply for sata.
- Change vcc-supply for ufshc.
- Add usb hub.
- ...

Changes in v2:
- Link to v1: https://lore.kernel.org/all/[email protected]/
- Enable hdmi_sound and sai6.
- Add more cpu-supply.
- Use regulator to control sata power.
- Remove "cap-mmc-highspeed" prop in sdmmc.
- Add regulator supply for ufshc.
- Add the missing vcc3v3_hubreset regulator.
- Add otg capability for usb_drd0_dwc3.

Chaoyi Chen (2):
dt-bindings: arm: rockchip: Add rk3576 evb2 board
arm64: dts: rockchip: Add rk3576 evb2 board

 .../devicetree/bindings/arm/rockchip.yaml     |    4 +-
 arch/arm64/boot/dts/rockchip/Makefile         |    1 +
 .../boot/dts/rockchip/rk3576-evb2-v10.dts     | 1020 +++++++++++++++++
 3 files changed, 1024 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-evb2-v10.dts
Signature · 1 line
2.51.1