Skip to content

Add support for HiTRON HAC300S PSU

Vasileios Amoiridis linux-devicetree linux-doc linux-hwmon lkml 2 versions – Applied

Status from this message: Applied.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 2 repliesApplied
  2. v12 patches 3 repliesSuperseded

Changes in v2 from the cover letter

--------------

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: trivial-devices: Add hitron,hac300sDocumentation/devicetree/bindings/trivial-devices.yaml Documentation/devicetree/bindings/vendor-prefixes.yaml+4 -01 reply
2/2hwmon: Add support for HiTRON HAC300S PSUDocumentation/hwmon/hac300s.rst Documentation/hwmon/index.rst MAINTAINERS +3 more+187 -01 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchKrzysztof Kozlowski
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] Add support for HiTRON HAC300S PSU

From: Vasileios Amoiridis <[email protected]>

Changes in v2:
--------------

Patch 1/2:
- fixed type
- Added Ack-By

Patch 2/2:
- removed if statement for VOUT_MODE reg
- device specific read_word_data function reads only affected registers and returns -ENODATA
- fixed typos

v1:
---

Add support for the HiTRON HAC300S AC/DC switching power supply in compact PCI format, with a 300W rating. This is a simple PMBUS compatible device.

There is a small caveat with the internal registers of the device and more specifically with the PMBUS_VOUT_MODE. As it is already described in the driver, the device does not support the PMBUS_VOUT_MODE register and at the same time, it returns the voltage output values in Linear11 which is not adhering to the PMBus specification (PMBus Specification Part II, Section 7.1-7.3). For that reason the PMBUS_VOUT_MODE register is being faked and returns the exponent value of the READ_VOUT register. The exponent part of the VOUT_* registers is being cleard in order to return the mantissa to the pmbus core.

Vasileios Amoiridis (2):
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: Add support for HiTRON HAC300S PSU

 .../devicetree/bindings/trivial-devices.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 Documentation/hwmon/hac300s.rst               |  37 +++++
 Documentation/hwmon/index.rst                 |   1 +
 MAINTAINERS                                   |   7 +
 drivers/hwmon/pmbus/Kconfig                   |   9 ++
 drivers/hwmon/pmbus/Makefile                  |   1 +
 drivers/hwmon/pmbus/hac300s.c                 | 132 ++++++++++++++++++
 8 files changed, 191 insertions(+)
 create mode 100644 Documentation/hwmon/hac300s.rst
 create mode 100644 drivers/hwmon/pmbus/hac300s.c
Signature · 1 line
2.47.3