Skip to content

RFC net/mlx5e: Expose physical received bits counters to ethtool

Kenta Akagi linux-rdma lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest1 patch 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1net/mlx5e: Expose physical received bits counters to ethtooldrivers/net/ethernet/mellanox/mlx5/core/en_stats.c+1 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH RFC mlx5-next 0/1] net/mlx5e: Expose physical received bits counters to ethtool

Hi,

I would like to measure the cable BER on ConnectX.

According to the documentation[1][2], there are counters that can be used for this purpose: rx_corrected_bits_phy, rx_pcs_symbol_err_phy and rx_bits_phy. However, rx_bits_phy does not show up in ethtool statistics.

This patch exposes the PPCNT phy_received_bits as rx_bits_phy.

On a ConnectX-5 with 25Gbase connection, it works as expected.

On the other hand, although I have not verified it, in an 800Gbps environment rx_bits_phy would likely overflow after about 124 days. Since I cannot judge whether this is acceptable, I am posting this as an RFC first.

[1] commit 8ce3b586faa4 ("net/mlx5: Add counter information to mlx5
driver documentation")
[2] https://docs.kernel.org/networking/device_drivers/ethernet/mellanox/mlx5/counters.html

Kenta Akagi (1):
net/mlx5e: Expose physical received bits counters to ethtool

 drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 1 +
 1 file changed, 1 insertion(+)
Signature · 1 line
2.50.1