arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 board
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest3 patches 11 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 evb1arch/ | +4 | 6 replies | |
| 2/3 | arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for roc-rk3576-pcarch/ | +2 | 0 replies | |
| 3/3 | arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for ROCK 4Darch/ | +2 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 board
From: Chaoyi Chen <[email protected]>
According to the description in the net documentation, PHY modes "rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock signal to be delayed on the PCB.
The Rockchip platform has long used the above mentioned PHY modes and private delay prop to describe the internal IO delay settings of the chip, which is inconsistent with what is described in the documentation.
Some background, for RK3576, you can assume that:
tx_delay_time(ns) = 0.0579 * delay_line_count + 0.105
For example, tx_delay = <0x20> means:
time = 0.0579 * 0x20 + 0.105 ns = 1.9578 ns
Recently, Andrew has often mentioned the problem of phy mode in board level configuration. So let's start with the RK3576 to modify this.
Please test this series of patches, thanks.
Chaoyi Chen (3):
arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 evb1
arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for
roc-rk3576-pc
arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for ROCK 4D
arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 8 ++++---- arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts | 5 ++--- arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts | 5 ++--- 3 files changed, 8 insertions(+), 10 deletions(-)
Signature · 1 line
2.51.1