Fix OV02C10 camera stability on Snapdragon X Elite
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] Fix OV02C10 camera stability on Snapdragon X Elite
This patch series fixes critical stability issues with the OV02C10 camera sensor on Snapdragon X Elite platforms, specifically tested on the Lenovo Yoga Slim 7x (x1e80100).
Problems addressed:
===================
1. Camera pipeline permanently locked after application closes
- Affects qcom-camss driver
- Caused by early return in video_stop_streaming() on subdev errors
- Result: Camera unusable until reboot
2. Silent failure in sensor disable path
- Affects ov02c10 driver
- I2C write errors during stream stop are silently ignored
- Hinders debugging of power management issues
3. Brownout/latch-up from rapid power cycling
- Affects ov02c10 driver
- Occurs during browser WebRTC permission flows (rapid open/close/open)
- Sensor microcontroller locks up requiring full system reboot
- Root cause: Incomplete regulator discharge between power cycles
Without these fixes, the camera becomes permanently unusable after rapid open/close cycles and requires a full system reboot to recover.
Testing:
========
All patches tested together on Linux 6.19-rc5 with:
- 50+ camera open/close/open rapid cycles (< 100ms between operations)
- Browser WebRTC permission flows (Chrome, Firefox, Brave)
- qcam stress testing
- libcamera/pipewire integration testing
Hardware tested:
- Lenovo Yoga Slim 7x (Snapdragon X Elite x1e80100)
- OmniVision OV02C10 2MP RGB camera sensor
Ubuntu bug tracking:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2138756
Patch overview:
===============
Patch 1: Fix qcom-camss pipeline lock leak
- Ensures pipeline is always released even when subdevices fail to stop
- Prevents permanent camera lockup
- Improves error messages to identify failing subdevice
Patch 2: Add error logging to ov02c10 disable_streams
- Captures and logs I2C write failures during stream stop
- Still returns 0 to prevent pipeline lock leaks
- Aids in debugging power management issues
Patch 3: Enforce 2-second power cycle cool-down in ov02c10
- Tracks last power-off timestamp
- Enforces minimum 2-second gap between power cycles
- Tested delays: 900ms (failed), 1500ms (failed), 2000ms (reliable)
- Improves power sequencing (MCLK off before regulators)
- Zero performance penalty for normal usage (camera opened after >2s)
Impact:
=======
These patches resolve a critical user-facing issue where the camera becomes completely unusable and requires a full system reboot to recover. This commonly occurs during:
- Browser WebRTC permission prompts
- Video conferencing application startup
- Rapid application switching
- Camera application crashes with immediate restart
The fixes are conservative, well-tested, and maintain backward compatibility while significantly improving system stability.
Saikiran (3):
media: qcom: camss: Fix pipeline lock leak in stop_streaming
media: i2c: ov02c10: Check for errors in disable_streams
media: i2c: ov02c10: Enforce cool-down period to prevent brownout
drivers/media/i2c/ov02c10.c | 75 +++++++++++++++++---- drivers/media/platform/qcom/camss/camss-video.c | 13 ++-- 2 files changed, 74 insertions(+), 14 deletions(-)
--
2.51.0