phy: qcom: edp: Add DP/eDP switch for phys
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected] change-id 20260205-edp_phy-1eca3ed074c0Versions newest first
- v5 Latest5 patches 2 repliesApplied
- v45 patches 14 repliesSuperseded
- v32 patches 13 repliesSuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 2 patches | 2 replies | Superseded | |
| v1 | 3 patches | 22 replies | Superseded |
Changes in v5 from the cover letter
- Correct the incorrect swing/pre-emphasis table used on SC8180x.[Konard][Dmitry]
- Fix the commit message and add the missing Fixes tag.[Dmitry]
- Reuse the HBR3 table for the RBR case on SC8180x.[Konard]
- Link to v4: https://lore.kernel.org/r/[email protected]
Patches in v5 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/5 | phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tablesdrivers/ | +10 | 0 replies | |
| 2/5 | phy: qcom: edp: Add eDP/DP mode switch supportdrivers/ | +34 | 0 replies | |
| 3/5 | phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tablesdrivers/ | +80 | 1 reply | |
| 4/5 | phy: qcom: edp: Fix AUX_CFG8 programming for DP modedrivers/ | +1 | 0 replies | |
| 5/5 | phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiffdrivers/ | +77 | 0 replies |
Reviews trailers per patch
All 5 patches have a Reviewed-by or Acked-by.
| Patch | Konrad Dybcio | Dmitry Baryshkov |
|---|---|---|
| 1/5 | R-b | R-b |
| 2/5 | R-b | |
| 3/5 | R-b | |
| 4/5 | R-b | R-b |
| 5/5 | R-b T-b | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/5] phy: qcom: edp: Add DP/eDP switch for phys
Currently the PHY selects the DP/eDP configuration tables in a fixed way, choosing the table when enable. This driver has known issues:
1. The selected table does not match the actual platform mode.
2. It cannot support both modes at the same time.
As discussed here[1], this series:
1. Cleans up duplicated and incorrect tables based on the HPG.
2. Fixes the LDO programming error in eDP mode.
3. Adds DP/eDP mode switching support.
Note: x1e80100/sa8775p/sc7280/SC8280XP have been tested, while glymur/sc8180x have not been tested.
[1] https://lore.kernel.org/all/[email protected]/
---
Changes in v5:
- Correct the incorrect swing/pre-emphasis table used on SC8180x.[Konard][Dmitry]
- Fix the commit message and add the missing Fixes tag.[Dmitry]
- Reuse the HBR3 table for the RBR case on SC8180x.[Konard]
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Splite changes.[Dmitry]
- Add sc8180x tables in a single chagne.[Dmitry][Konrad]
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Rebase to next-20260224.[Dmitry]
- Only enable TX1 LDO when lane counts > 2.[Konrad]
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2:
- Combine the third patch with the first one.[Dmitry]
- Fix code formatting issues.[Konrad][Dmitry]
- Update the commit message description.[Dmitry][Konrad]
- Fix kodiak swing/pre_emp table values.[Konrad]
---
Yongxing Mou (5):
phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tables
phy: qcom: edp: Add eDP/DP mode switch support
phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tables
phy: qcom: edp: Fix AUX_CFG8 programming for DP mode
phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiff
drivers/phy/qualcomm/phy-qcom-edp.c | 224 +++++++++++++++++++++++++++++------- 1 file changed, 181 insertions(+), 43 deletions(-)
---
base-commit: bee6ea30c48788e18348309f891ed8afbf7702ac
change-id: 20260205-edp_phy-1eca3ed074c0
Best regards,
Signature · 1 line
Yongxing Mou <[email protected]>