Skip to content

drm/xe: Set GT rp min frequency as 1.2GHz default for BMG/CRI

Nareshkumar Gollakoti intel-xe 4 versions – Applied

Status from this message: Applied to drm-xe-next. Thanks for the patch and review.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest1 patch 2 repliesApplied
  2. v31 patch 2 repliesSuperseded
  3. v21 patch 0 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v11 patch10 repliesSuperseded

v2 from the cover letter

- Fix Indentation(Thomas)
- Add comment about power impact(Stuart)

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/1drm/xe: Set GT rp min frequency as 1.2GHz default for BMG/CRIdrivers/gpu/drm/xe/xe_guc_pc.c+30 -21 reply

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchVinay Belgaumkar
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/1] drm/xe: Set GT rp min frequency as 1.2GHz default for BMG/CRI

Performance degradation occurs in multi-BMG GPU configurations during Peer-to-Peer transactions when one of the two GPUs remains idle with no engine activity.
The root cause has been identified as frequency downscaling:
the idle remote GPU reduces its operating frequency to the minimum 400MHz, which negatively impacts the bandwidth available for P2P transactions initiated by the active local GPU.

To address above problem this patch ensures for the platform BMG/CRI of graphics(GT0) tile.the default GT rp frquency min set as 1.2GHz to ensure effetive P2P transaction bandwidth.

Frequency boosting improves performance, but at the expense of power consumption.Note that this change only impacts active frequency, so idle power consumption should remain the same.

v2:
- Fix Indentation(Thomas)
- Add comment about power impact(Stuart)

v3:(Thomas/Ankur/Matt Roper)
- Add setting frequency to only GT0(Graphics) Tile of BMG/CRI

v4:(Stuart)
- Move WA check to pc_needs_min_freq_change function

Nareshkumar Gollakoti (1):
drm/xe: Set GT rp min frequency as 1.2GHz default for BMG/CRI

 drivers/gpu/drm/xe/xe_guc_pc.c | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)
Signature · 1 line
2.43.0