Skip to content

Add support for Zhunyi Z40046 LCD panel

Luca Leonardo Scorcia dri-devel linux-devicetree lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 3 repliesIn review
  2. v12 patches 1 replySuperseded

Changes in v2 from the cover letter

- Double checked and fixed some mistakes in the reverse engineered initialization sequences
- Changed the generic variant names -v1, -v2 into -ctc and -boe, as they're described in the Android logs
- Fix alphabetical order in bindings and correct company name

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: display: panel: Add compatibles for Zhunyi Z40046Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml Documentation/devicetree/bindings/vendor-prefixes.yaml+4 -01 reply
2/2drm/panel: jd9365da: Support for Zhunyi Z40046 panelsdrivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c+313 -02 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchConor Dooley
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] Add support for Zhunyi Z40046 LCD panel

The Zhunyi Z40046 is a 480x800 24-bit WVGA DSI panel based on the Fitipower JD9161Z DSI controller found in the Xiaomi Mi Smart Clock x04g, apparently in two different variants.

The Fitipower JD9161Z LCD driver IC is very similar to the Jadard JD9365DA-H3, it just uses different initialization sequences. A partial data sheet is available at [1].

The two initialization sequences for the panel have been extracted from Android original firmware for the Xiaomi Smart Clock.

Variant -ctc tested on device. Variant -boe not tested.

Changes in v2:
- Double checked and fixed some mistakes in the reverse engineered initialization sequences
- Changed the generic variant names -v1, -v2 into -ctc and -boe, as they're described in the Android logs
- Fix alphabetical order in bindings and correct company name

v1:
https://lore.kernel.org/all/[email protected]/

[1] https://github.com/QuecPython/QuecPython_lib_bundles/blob/master/libraries/LCD/JD91651z/JD9161Z_DS_Preliminary_V0.01_20180803(1).pdf

Luca Leonardo Scorcia (2):
dt-bindings: display: panel: Add compatibles for Zhunyi Z40046 drm/panel: jd9365da: Support for Zhunyi Z40046 panels

 .../display/panel/jadard,jd9365da-h3.yaml     |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 .../gpu/drm/panel/panel-jadard-jd9365da-h3.c  | 313 ++++++++++++++++++
 3 files changed, 317 insertions(+)
Signature · 1 line
2.43.0