Skip to content

Validate and clean up UHS/DDR/HS200 timing checks

Shawn Lin linux-mmc lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyIn review
  2. v12 patches 2 repliesSuperseded

Changes in v2 from the cover letter

- updating the temporary variables in the middle and update host's caps(2) in the final. (Ulf)

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2mmc: core: Validate UHS/DDR/HS200 timing selection for 1-bit bus widthdrivers/mmc/core/host.c+13 -10 replies
2/2mmc: core: Remove checking MMC_CAP_4_BIT_DATA from mmc_host_can_uhs()drivers/mmc/core/host.h+1 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] Validate and clean up UHS/DDR/HS200 timing checks

From: Shawn Lin <[email protected]>

This series adds validation for UHS/DDR/HS200 timing modes when the host only supports 1-bit bus width which also fixes a real performance drop issue due to incorrect hs200 mode switch code. And then cleans up the check in mmc_host_can_uhs().

Changes in v2:
- updating the temporary variables in the middle and update host's caps(2) in the final. (Ulf)

Luke Wang (1):
mmc: core: Validate UHS/DDR/HS200 timing selection for 1-bit bus width

Shawn Lin (1):
mmc: core: Remove checking MMC_CAP_4_BIT_DATA from mmc_host_can_uhs()

 drivers/mmc/core/host.c | 14 +++++++++++++-
 drivers/mmc/core/host.h |  6 +-----
 2 files changed, 14 insertions(+), 6 deletions(-)
Signature · 1 line
2.7.4