Skip to content

k3-am62-pocketbeagle2: add board and variant support

[email protected] u-boot 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest3 patches 2 repliesIn review
  2. v43 patches 1 replySuperseded
  3. v34 patches 5 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v25 patches8 repliesSuperseded
v13 patches26 repliesSuperseded

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm: mach-k3: am62: add &main_uart6 to clock and pwr treearch/arm/mach-k3/r5/am62x/clk-data.c arch/arm/mach-k3/r5/am62x/dev-data.c+18 -60 replies
2/3k3-am62-pocketbeagle2: add initial board supportarch/arm/dts/Makefile arch/arm/dts/k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi arch/arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi +16 more+867 -611 reply
3/3k3-am62-pocketbeagle2: add support for efi capsulesarch/arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi board/beagle/pocketbeagle2/pocketbeagle2.c configs/am62_pocketbeagle2_a53_defconfig +1 more+81 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchAndrew Davis
1/3
2/3R-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCHv5 0/3] k3-am62-pocketbeagle2: add board and variant support

From: Randolph Sapp <[email protected]>

Resubmitting with a synced rm-cfg.yaml and tuned diff parameters. We desperately need to add documentation about how the rm-cfg.yaml is generated here. And the beagleplay needs to get it's rm-cfg resynced with am62x at some point.

Since it's been decided internally to follow along with what Zephyr is doing and make a completely separate device tree for the 1GB + eMMC Industrial board, I'm resubmitting v3 with the variant support patch dropped. We will circle back to enable the Industrial part once the dt has been accepted kernel side.

See the following link for more information regarding that decision:
https://lore.kernel.org/u-boot/[email protected]/

Add initial board support for the PocketBeagle 2 from BeagleBoard.org. This is based on the current official series from Robert Nelson [1] and work from Bryan Brattlof [2].

Now that the various memory issues have been resolved we can clearly see at runtime that there's an issue with the current device. One of our reservations overlaps with the u-boot stack. To get around this we'll need to change the relocation address to something we know will not collide.

[1] https://github.com/beagleboard/u-boot/tree/v2026.01-am62-pocketbeagle2
[2] https://github.com/bryanbrattlof/beagleboot/tree/b4/pb2i

Bryan Brattlof (1):
arm: mach-k3: am62: add &main_uart6 to clock and pwr tree

Randolph Sapp (2):
k3-am62-pocketbeagle2: add initial board support
k3-am62-pocketbeagle2: add support for efi capsules

 arch/arm/dts/Makefile                         |   1 +
 ...> k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi} |  92 ++---
 .../arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi | 336 ++++++++++++++++++
 arch/arm/dts/k3-am62-r5-pocketbeagle2.dts     |  35 ++
 arch/arm/mach-k3/am62x/Kconfig                |   1 +
 arch/arm/mach-k3/r5/am62x/clk-data.c          |  19 +-
 arch/arm/mach-k3/r5/am62x/dev-data.c          |   5 +-
 board/beagle/pocketbeagle2/Kconfig            |  60 ++++
 board/beagle/pocketbeagle2/MAINTAINERS        |  10 +
 board/beagle/pocketbeagle2/Makefile           |   9 +
 .../board-cfg.yaml                            |   0
 .../{beagleplay => pocketbeagle2}/pm-cfg.yaml |   0
 board/beagle/pocketbeagle2/pocketbeagle2.c    |  84 +++++
 board/beagle/pocketbeagle2/pocketbeagle2.env  |  26 ++
 .../pocketbeagle2}/rm-cfg.yaml                |   0
 .../sec-cfg.yaml                              |   0
 ...onfig => am62_pocketbeagle2_a53_defconfig} |  25 +-
 ...config => am62_pocketbeagle2_r5_defconfig} |  11 +-
 doc/board/beagle/am62_pocketbeagle2.rst       | 279 +++++++++++++++
 doc/board/beagle/index.rst                    |   1 +
 include/configs/pocketbeagle2.h               |  39 ++
 21 files changed, 966 insertions(+), 67 deletions(-)
 copy arch/arm/dts/{k3-am62x-sk-ddr4-1600MTs.dtsi => k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi} (97%)
 create mode 100644 arch/arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-am62-r5-pocketbeagle2.dts
 create mode 100644 board/beagle/pocketbeagle2/Kconfig
 create mode 100644 board/beagle/pocketbeagle2/MAINTAINERS
 create mode 100644 board/beagle/pocketbeagle2/Makefile
 copy board/beagle/{beagleplay => pocketbeagle2}/board-cfg.yaml (100%)
 copy board/beagle/{beagleplay => pocketbeagle2}/pm-cfg.yaml (100%)
 create mode 100644 board/beagle/pocketbeagle2/pocketbeagle2.c
 create mode 100644 board/beagle/pocketbeagle2/pocketbeagle2.env
 copy board/{ti/am62x => beagle/pocketbeagle2}/rm-cfg.yaml (100%)
 copy board/beagle/{beagleplay => pocketbeagle2}/sec-cfg.yaml (100%)
 copy configs/{am62x_beagleplay_a53_defconfig => am62_pocketbeagle2_a53_defconfig} (88%)
 copy configs/{am62x_beagleplay_r5_defconfig => am62_pocketbeagle2_r5_defconfig} (89%)
 create mode 100644 doc/board/beagle/am62_pocketbeagle2.rst
 create mode 100644 include/configs/pocketbeagle2.h
Signature · 1 line
2.55.0