Skip to content

tests/kms_hdmi_inject: Add low refresh rate subtests

Mohammed Bilal igt-dev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2tests/kms_hdmi_inject: Add inject-low-refresh-fixed-clock subtesttests/kms_hdmi_inject.c+158 -00 replies
2/2tests/kms_hdmi_inject: Add inject-low-refresh-default-clock subtesttests/kms_hdmi_inject.c+137 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/2] tests/kms_hdmi_inject: Add low refresh rate subtests

This series adds two subtests to validate low refresh rate (11Hz, 10Hz, 5Hz, 4Hz) mode handling on HDMI connectors. The tests verify driver behavior around the hardware minimum pixel clock threshold (34.38 MHz).

Patch 1 adds a positive test that validates low refresh rates are achievable when pixel clock is maintained at the hardware minimum by adjusting vtotal.

Patch 2 adds a negative test that validates the driver correctly rejects modes when the standard pixel clock calculation drops below the hardware minimum.

Together these tests ensure the driver properly enforces hardware constraints while still supporting valid low refresh rate configurations.

Mohammed Bilal (2):
tests/kms_hdmi_inject: Add inject-low-refresh-fixed-clock subtest tests/kms_hdmi_inject: Add inject-low-refresh-default-clock subtest

 tests/kms_hdmi_inject.c | 295 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 295 insertions(+)
Signature · 1 line
2.48.1