Skip to content

Initial device tree support for StarFive JHB100 SoC

Changhuang Liang linux-devicetree linux-riscv lkml 3 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 4 repliesApplied
  2. v24 patches 8 repliesSuperseded
  3. v15 patches 7 repliesApplied

Changes in v3 from the cover letter

- Add a new patch 4

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/5dt-bindings: riscv: Add StarFive Dubhe-70 compatiblesDocumentation/devicetree/bindings/riscv/cpus.yaml+1 -00 replies
2/5dt-bindings: interrupt-controller: Add StarFive JHB100 plicDocumentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml+1 -01 reply
3/5dt-bindings: riscv: Add StarFive JHB100 SoCDocumentation/devicetree/bindings/riscv/starfive.yaml+5 -00 replies
4/5dt-bindings: serial: snps-dw-apb-uart: Add StarFive JHB100 UART compatibleDocumentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml+1 -01 reply
5/5riscv: dts: starfive: jhb100: Add JHB100 base DTMAINTAINERS arch/riscv/boot/dts/starfive/Makefile arch/riscv/boot/dts/starfive/jhb100-evb1.dts +1 more+371 -02 replies

Reviews trailers per patch

4 of 5 patches have a Reviewed-by or Acked-by.

PatchConor DooleyHal FengRob Herring (Arm)
1/5R-b A-b
2/5A-b R-b
3/5R-b A-b
4/5A-b
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v3 thread

Cover letter [PATCH v3 0/5] Initial device tree support for StarFive JHB100 SoC

StarFive JHB100 SoC consists of 4 RISC-V low power Cores (Dubhe-70). It also features various interfaces such as I2C, SPI, CAN, USB, MMC, Uart, etc.

This patch series introduces initial SoC DTSI support for the StarFive JHB100 SoC. The relevant dt-binding documentation has been updated accordingly. Below is the list of IP blocks added in the initial SoC DTSI.

- StarFive Dubhe-70 CPU
- PMU
- PLIC
- CLINT
- UART
- INTC

changes since v2:
- Add a new patch 4

patch 5:
- Remove the 'riscv,isa' property.
- Add 'starfive,jhb100-uart' to the UART node.
- Update bus node name.
- Remove the interrupts-extended property in riscv,pmu

v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/[email protected]/

Changhuang Liang (1):
dt-bindings: serial: snps-dw-apb-uart: Add StarFive JHB100 UART
compatible

Ji Sheng Teoh (1):
dt-bindings: riscv: Add StarFive Dubhe-70 compatibles

Ley Foon Tan (3):
dt-bindings: interrupt-controller: Add StarFive JHB100 plic
dt-bindings: riscv: Add StarFive JHB100 SoC
riscv: dts: starfive: jhb100: Add JHB100 base DT

 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/cpus.yaml       |   1 +
 .../devicetree/bindings/riscv/starfive.yaml   |   5 +
 .../bindings/serial/snps-dw-apb-uart.yaml     |   1 +
 MAINTAINERS                                   |   6 +
 arch/riscv/boot/dts/starfive/Makefile         |   2 +
 arch/riscv/boot/dts/starfive/jhb100-evb1.dts  |  32 ++
 arch/riscv/boot/dts/starfive/jhb100.dtsi      | 331 ++++++++++++++++++
 8 files changed, 379 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100-evb1.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jhb100.dtsi

--
2.25.1