Skip to content

xhci features for usb-next

Mathias Nyman linux-usb stable 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest25 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/25xhci: use BIT macrodrivers/usb/host/xhci.h+61 -600 replies
2/25usb: xhci: Simplify clearing the Event Interrupt bitdrivers/usb/host/xhci-ring.c+2 -30 replies
3/25usb: xhci: Fix debugfs bandwidth reportingdrivers/usb/host/xhci-debugfs.c drivers/usb/host/xhci.c+15 -40 replies
4/25usb: xhci: simplify CMRT initialization logicdrivers/usb/host/xhci.c+3 -50 replies
5/25usb: xhci: relocate Restore/Controller error checkdrivers/usb/host/xhci.c+5 -80 replies
6/25usb: xhci: factor out roothub bandwidth cleanupdrivers/usb/host/xhci-mem.c+29 -210 replies
7/25usb: xhci: move reserving command ring trbdrivers/usb/host/xhci-mem.c drivers/usb/host/xhci.c+6 -70 replies
8/25usb: xhci: move ring initializationdrivers/usb/host/xhci-mem.c drivers/usb/host/xhci.c drivers/usb/host/xhci.h+18 -50 replies
9/25usb: xhci: move initialization for lifetime objectsdrivers/usb/host/xhci-mem.c drivers/usb/host/xhci.c+8 -80 replies
10/25usb: xhci: split core allocation and initializationdrivers/usb/host/xhci-mem.c drivers/usb/host/xhci.c+13 -200 replies
11/25usb: xhci: improve debug messages during suspenddrivers/usb/host/xhci.c+37 -280 replies
12/25usb: xhci: optimize resuming from S4 (suspend-to-disk)drivers/usb/host/xhci-mem.c drivers/usb/host/xhci.c drivers/usb/host/xhci.h+34 -230 replies
13/25usb: xhci: stop treating 'wIndex' as a mutable port numberdrivers/usb/host/xhci-hub.c+30 -350 replies
14/25usb: xhci: rename 'wIndex' parameters to 'portnum'drivers/usb/host/xhci-hub.c+27 -330 replies
15/25usb: xhci: clean up handling of upper bits in SetPortFeature wIndexdrivers/usb/host/xhci-hub.c+12 -130 replies
16/25usb: xhci: clean up 'wValue' handling in xhci_hub_control()drivers/usb/host/xhci-hub.c+6 -40 replies
17/25usb: xhci: separate use of USB Chapter 11 PLS macros from xHCI-specific PLS macrosdrivers/usb/host/xhci-hub.c+7 -70 replies
18/25usb: xhci: add PORTPMSC variable to xhci_hub_control()drivers/usb/host/xhci-hub.c+9 -90 replies
19/25usb: xhci: add PORTSC variable to xhci_hub_control()drivers/usb/host/xhci-hub.c+51 -510 replies
20/25usb: xhci: rename parameter to match argument 'portsc'drivers/usb/host/xhci-hub.c+30 -310 replies
21/25usb: xhci: cleanup xhci_hub_report_usb3_link_state()drivers/usb/host/xhci-hub.c+20 -360 replies
22/25usb: xhci: simpilfy resume root hub codedrivers/usb/host/xhci.c+16 -200 replies
23/25usb: xhci: move roothub port limit validationdrivers/usb/host/xhci-mem.c+18 -270 replies
24/25usb: xhci: remove duplicate '0x' prefixdrivers/usb/host/xhci-mem.c drivers/usb/host/xhci-ring.c+5 -50 replies
25/25usb: xhci: Make usb_host_endpoint.hcpriv survive endpoint_disable()drivers/usb/host/xhci.c include/linux/usb.h+2 -20 replies

Reviews trailers per patch

2 of 25 patches have a Reviewed-by or Acked-by.

PatchAndy Shevchenko
1/25
2/25
3/25
4/25R-b
5/25R-b
6/25
7/25
8/25
9/25
10/25
11/25
12/25
13/25
14/25
15/25
16/25
17/25
18/25
19/25
20/25
21/25
22/25
23/25
24/25
25/25

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/25] xhci features for usb-next

Hi Greg

A couple small fixes and a lot of xhci refactoring, decoupling and cleanups for usb-next.

Thanks
Mathias

Michal Pecio (3):
usb: xhci: Simplify clearing the Event Interrupt bit
usb: xhci: Fix debugfs bandwidth reporting
usb: xhci: Make usb_host_endpoint.hcpriv survive endpoint_disable()

Niklas Neronin (21):
usb: xhci: simplify CMRT initialization logic
usb: xhci: relocate Restore/Controller error check
usb: xhci: factor out roothub bandwidth cleanup
usb: xhci: move reserving command ring trb
usb: xhci: move ring initialization
usb: xhci: move initialization for lifetime objects
usb: xhci: split core allocation and initialization
usb: xhci: improve debug messages during suspend
usb: xhci: optimize resuming from S4 (suspend-to-disk)
usb: xhci: stop treating 'wIndex' as a mutable port number
usb: xhci: rename 'wIndex' parameters to 'portnum'
usb: xhci: clean up handling of upper bits in SetPortFeature wIndex
usb: xhci: clean up 'wValue' handling in xhci_hub_control()
usb: xhci: separate use of USB Chapter 11 PLS macros from
xHCI-specific PLS macros
usb: xhci: add PORTPMSC variable to xhci_hub_control()
usb: xhci: add PORTSC variable to xhci_hub_control()
usb: xhci: rename parameter to match argument 'portsc'
usb: xhci: cleanup xhci_hub_report_usb3_link_state()
usb: xhci: simpilfy resume root hub code
usb: xhci: move roothub port limit validation
usb: xhci: remove duplicate '0x' prefix

Oliver Neukum (1):
xhci: use BIT macro

 drivers/usb/host/xhci-debugfs.c |  10 +-
 drivers/usb/host/xhci-hub.c     | 381 +++++++++++++++-----------------
 drivers/usb/host/xhci-mem.c     | 133 +++++------
 drivers/usb/host/xhci-ring.c    |   9 +-
 drivers/usb/host/xhci.c         | 229 ++++++++++---------
 drivers/usb/host/xhci.h         | 124 ++++++-----
 include/linux/usb.h             |   3 +-
 7 files changed, 444 insertions(+), 445 deletions(-)
Signature · 1 line
2.43.0