Skip to content

ARMv8 timer fixes for platforms without EL2 configuration

Balaji Selvanathan u-boot 1 version In review

Get series with b4
b4 am [email protected] change-id 20260406-timer-07c406ca4987

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2armv8: timer: Add option to use virtual counter at EL1arch/arm/cpu/armv8/Kconfig arch/arm/cpu/armv8/generic_timer.c+32 -00 replies
2/2snapdragon: Set timer frequency for ARMV8_CNTFRQ_BROKEN platformsarch/arm/mach-snapdragon/board.c+17 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] ARMv8 timer fixes for platforms without EL2 configuration

This series addresses timer-related issues on ARMv8 platforms where U-Boot runs at EL1 without a Hypervisor present. This is commonly encountered when using tools like snagboot for
recovery and development.

On such platforms, U-Boot runs at EL1 but EL2 timer control registers may not be properly configured as Hypervisor is not present.

---
Balaji Selvanathan (2):
armv8: timer: Add option to use virtual counter at EL1
snapdragon: Set timer frequency for ARMV8_CNTFRQ_BROKEN platforms

 arch/arm/cpu/armv8/Kconfig         | 19 +++++++++++++++++++
 arch/arm/cpu/armv8/generic_timer.c | 13 +++++++++++++
 arch/arm/mach-snapdragon/board.c   | 17 +++++++++++++++++
 3 files changed, 49 insertions(+)

---
base-commit: 47e064f13171f15817aa1b22b04e309964b15c2c
change-id: 20260406-timer-07c406ca4987

Best regards,

Signature · 1 line
Balaji Selvanathan <[email protected]>