PCI: tegra194: ASPM L1 entrance latency from device tree
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest2 patches 5 repliesApplied
- v21 patch 2 repliesSuperseded
- v11 patch 2 repliesSuperseded
Patches in v3 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | PCI: tegra194: Use aspm-l1-entry-delay-ns DT property for L1 entrance latencydrivers/ | +13 | 2 replies | |
| 2/2 | arm64: tegra: fix aspm-l1-entry-delay-ns L1 latency cellsarch/ arch/ | +25 | 1 reply |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/2] PCI: tegra194: ASPM L1 entrance latency from device tree
This series programs Synopsys DesignWare ASPM L1 entrance latency on NVIDIA Tegra194/234 PCIe controllers from an optional device tree property and corrects the default nanosecond cells so the PORT_AFR field advertises the intended latency buckets.
Background
----------
The controller exposes L1 entrance latency in PCI Express PORT_AFR (DW DBI), bits 27:29. Software must select a 3-bit code for the maximum L1 entry delay the platform can tolerate. Patch 1 reads aspm-l1-entry-delay-ns (nanoseconds), converts to whole microseconds with ceiling division (DIV_ROUND_UP), and programs min(order_base_2(us), 7) into PORT_AFR during ASPM init. If the property is absent, the driver keeps the existing default (code 7).
PORT_AFR L1 entrance latency encoding (bits 27:29)
--------------------------------------------------
+--------------------------+----------+ | Advertised maximum | Code | +--------------------------+----------+ | Maximum of 1 us | 000b | +--------------------------+----------+ | Maximum of 2 us | 001b | +--------------------------+----------+ | Maximum of 4 us | 010b | +--------------------------+----------+ | Maximum of 8 us | 011b | +--------------------------+----------+ | Maximum of 16 us | 100b | +--------------------------+----------+ | Maximum of 32 us | 101b | +--------------------------+----------+ | Maximum of 64 us | 110b | +--------------------------+----------+ | Rest | 111b | +--------------------------+----------+
Patch summary
-------------
1/2 PCI: tegra194: Use aspm-l1-entry-delay-ns DT property for L1 entrance
latency
Add driver support described above. v1 and v2 could not program encoding 0 (000b, 1 us bucket); v3 uses order_base_2(us) so values map to the table.
2/2 arm64: tegra: fix aspm-l1-entry-delay-ns L1 latency cells
Commit d60ed99f1c9e ("arm64: tegra: Add aspm-l1-entry-delay-ns to PCIe nodes") added 4000 / 8000 / 16000 ns cells. After ceiling conversion those are 4 / 8 / 16 us, yielding PORT_AFR codes 2 / 3 / 4. The intended advertisement is codes 3 / 4 / 5 (8 / 16 / 32 us buckets). Double each nanosecond cell:
tegra194.dtsi: 4000 -> 8000 ns (all Root Port and Endpoint nodes) tegra234.dtsi: 8000 -> 16000 ns (Root Port), 16000 -> 32000 ns (Endpoint)
With the v3 driver mapping in place, the original nanosecond cells no longer yield the intended PORT_AFR codes; doubling them restores codes 3 / 4 / 5 as described above.
Testing
-------
- Verified device tree parsing and PORT_AFR encoding on target hardware.
- Exercised boundary nanosecond values with a temporary debug patch.
- Built on x86_64 (previous revision exposed a tree build failure).
Manikanta Maddireddy (2):
PCI: tegra194: Use aspm-l1-entry-delay-ns DT property for L1 entrance
latency
arm64: tegra: fix aspm-l1-entry-delay-ns L1 latency cells
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 18 ++++++------ arch/arm64/boot/dts/nvidia/tegra234.dtsi | 32 +++++++++++----------- drivers/pci/controller/dwc/pcie-tegra194.c | 13 +++++++++ 3 files changed, 38 insertions(+), 25 deletions(-)
Signature · 1 line
2.34.1