Skip to content

gpib: Add support for ines pci_xl board

Dave Penkler lkml stable 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6gpib: Add enums for INES 72130 based cardsdrivers/gpib/ines/ines.h+16 -00 replies
2/6gpib: Add ines 72130 line_status routinedrivers/gpib/ines/ines_gpib.c+28 -00 replies
3/6gpib: Don't use extended registersdrivers/gpib/ines/ines_gpib.c+6 -00 replies
4/6gpib: Add ines_pci_xl_interfacedrivers/gpib/ines/ines_gpib.c+28 -00 replies
5/6gpib: Add attach routine for pci_xl boarddrivers/gpib/ines/ines_gpib.c+19 -00 replies
6/6gpib; Add register and unregister callsdrivers/gpib/ines/ines_gpib.c+9 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] gpib: Add support for ines pci_xl board

INES have 2 pci boards that both have the same vendor and device ID [16da:0011]. The older board is based on the 72010 chip that has a number of extended registers that are missing in the 72130 based board. This caused random error messages when the 72130 based board was being used. The one extended register in the 72130 chip is the bus status register which is at a different offset and has a different layout.

The proprietary ines driver uses some undocumented heuristics to determine which board is being used. In order to configure the correct behaviour of the linux ines gpib driver for the 72130 based board we introduce a new board type "ines_pci_xl" and rely on user configuration to set the appropriate board type. The chip type is set in the ines_pci_xl_attach() routine and the ines72130_line_status() routine accesses the 72130 bus status register.

Patch 1: Add the chip type enum, the BSR offset and bit mask enums Patch 2: Adds the 72130 specific line_status routine Patch 3: Avoids accessing the extended registers when in 72130 mode Patch 4: Adds the pci_xl gpib_interface initialisation structure Patch 5: Add the attach routine for the 72130 based pci_xl board Patch 6: Adds the common driver register and unregister calls

Dave Penkler (6):
gpib: Add enums for INES 72130 based cards
gpib: Add ines 72130 line_status routine
gpib: Don't use extended registers
gpib: Add ines_pci_xl_interface
gpib: Add attach routine for pci_xl board
gpib; Add register and unregister calls

 drivers/gpib/ines/ines.h      | 16 +++++++
 drivers/gpib/ines/ines_gpib.c | 90 +++++++++++++++++++++++++++++++++++
 2 files changed, 106 insertions(+)
Signature · 1 line
2.53.0